Maxima R34 Type Dual Reflector Headlights INSTALLED
12-07-2006, 04:51 PM
#283
In order to aim the lights, is there an adjustment screw for letf/right also or just up and down? I just picked up a set of the blacked out version and it looks like there is only one screw for adjustment. They do look good though....I'll have pics of them this week on my bright red 99 SE-L.
12-08-2006, 08:38 PM
#286
Licensed to Spell
iTrader: (12)
Join Date: Feb 2001
Location: Murrieta (southern California)
Posts: 4,521
:o)
Originally Posted by ewuzh
Absolutely 100% Zero modification needed. It comes with a bracket that bolts on to the existing stock bracket to change the mounting point. They are very easy to take out. 2 bolts and 1 screw and they are out.
heh, always tryin to shave a few pounds wherever you can huh Josh.
They're about the same...I didn't notice either one being noticibly heavier or lighter.
heh, always tryin to shave a few pounds wherever you can huh Josh.
They're about the same...I didn't notice either one being noticibly heavier or lighter.Thanks bud.
12-12-2006, 03:10 PM
#288
I believe there are a couple of vendors selling them. Shipping should be the same to Canada unless it states otherwise on the shipping info. Check the seller rating...if he is a power seller...99% chance you will get your item.
12-12-2006, 03:47 PM
#289
Member
Join Date: Nov 2006
Location: Calgary
Posts: 176
Originally Posted by Capital15
I believe there are a couple of vendors selling them. Shipping should be the same to Canada unless it states otherwise on the shipping info. Check the seller rating...if he is a power seller...99% chance you will get your item.
12-12-2006, 07:45 PM
#290
I believe that shipping to canada was 60us.
check it out though... I'm kinda debating on these, but the beam pattern sux and I don't have 200+ to spend on projectors to retrofit into them....
check it out though... I'm kinda debating on these, but the beam pattern sux and I don't have 200+ to spend on projectors to retrofit into them....
12-13-2006, 07:25 AM
#292
Member
Join Date: Nov 2006
Location: Calgary
Posts: 176
Originally Posted by JSMax
I believe that shipping to canada was 60us.
check it out though... I'm kinda debating on these, but the beam pattern sux and I don't have 200+ to spend on projectors to retrofit into them....
check it out though... I'm kinda debating on these, but the beam pattern sux and I don't have 200+ to spend on projectors to retrofit into them....
12-15-2006, 10:59 AM
#297
Originally Posted by nguyen925
has anyone completed a retro using these lights?
12-15-2006, 09:54 PM
#300
hey ewuzh, ever been in the irvine area? thought i saw a car just like yours and is the reason why im looking into these lights......they look amazing but a little iffy on the light output....but heck i needed new headlights anyway, i better drop those gift hints quick 
oh and just curious but can anyone w/ them installed give a highbeam output pic???
oh and just curious but can anyone w/ them installed give a highbeam output pic???
12-15-2006, 09:58 PM
#301
Supporting Maxima.org Member
Thread Starter
iTrader: (20)
Join Date: Oct 2004
Location: SoCal
Posts: 3,058
Originally Posted by maximomar
hey ewuzh, ever been in the irvine area? thought i saw a car just like yours and is the reason why im looking into these lights......they look amazing but a little iffy on the light output....but heck i needed new headlights anyway, i better drop those gift hints quick
oh and just curious but can anyone w/ them installed give a highbeam output pic???
oh and just curious but can anyone w/ them installed give a highbeam output pic???
12-16-2006, 12:05 AM
#302
Originally Posted by ewuzh
Well the headlights will only bolt up to it one way...This is the driver side:
12-18-2006, 07:58 AM
#309
Senior Member
Join Date: Nov 2005
Posts: 278
Originally Posted by Karim
...I see pictures on page one. You even bother to look?
Originally Posted by nguyen925
has anyone completed a retro using these lights?
I'm so dang close. Just been super lazy to go and remove the original headlights to test fit the bad boys. Also just need to make a custom shroud and then it's all gravy. Will post pics when done tho
has anyone completed a retro using these lights?
I'm so dang close. Just been super lazy to go and remove the original headlights to test fit the bad boys. Also just need to make a custom shroud and then it's all gravy. Will post pics when done tho
Some ppl on this forum are so quick to try to bash ppl when they don't even know what the fukk they're talkin bout.
12-19-2006, 05:48 AM
#311
Ok, So I received my R43 blacked out headlamps in the mail and threw them on the car. They look bada** with the shiny red paint. I slapped in an 8000K HID setup for the lowbeams. Light output and beam pattern is useless but I'm going to throw some Audi projectors in there soon. My question is how do I hook up the halogen high beams with the HID low beams. Right now I used the low beam wire and the negative wire from the harness to hook up the HID's and the high beam smaller guage wire is still intact with the stock harness. I go to flash the high beams and the highs don't shine.
12-19-2006, 06:36 AM
#313
for the people who are have gotten these....are yall getting all of these of ebay or have yall seen the ones custom enterprises are selling(sorry if someone already mentioned this throughout the 11 pages)
12-19-2006, 07:03 AM
#314
Originally Posted by Dasyce
we need to get a group deal going on these..
12-19-2006, 08:19 AM
#315
Supporting Maxima.org Member
iTrader: (3)
Join Date: Apr 2001
Location: Long Island, NY
Posts: 1,444
Originally Posted by 2da mizzax
I dont have a paypal account but i will try to set a group deal up. last group deal required at least 10 people and i am pretty sure you will have to get 10 people who have already payed before the deal goes through. I think the last deal price was $205 shipped.
I don’t want to send money to a member, unless they are admin. / mod. I’ve been here a while and have seen group deals go bad.
12-19-2006, 09:05 AM
#316
Originally Posted by paul5:14
Hes referring to this at the end of the last page:
did you bother to read the thread?
Some ppl on this forum are so quick to try to bash ppl when they don't even know what the fukk they're talkin bout.
did you bother to read the thread?
Some ppl on this forum are so quick to try to bash ppl when they don't even know what the fukk they're talkin bout.
You call that bashing??
I didn't see a quote in that post...did you? Fukk outta here...
12-19-2006, 01:30 PM
#317
Originally Posted by Dasyce
I’m trying to get a vendor involved.
I don’t want to send money to a member, unless they are admin. / mod. I’ve been here a while and have seen group deals go bad.
I don’t want to send money to a member, unless they are admin. / mod. I’ve been here a while and have seen group deals go bad.
12-19-2006, 02:46 PM
#319
Originally Posted by maximabebe
Ok, So I received my R43 blacked out headlamps in the mail and threw them on the car. They look bada** with the shiny red paint. I slapped in an 8000K HID setup for the lowbeams. Light output and beam pattern is useless but I'm going to throw some Audi projectors in there soon. My question is how do I hook up the halogen high beams with the HID low beams. Right now I used the low beam wire and the negative wire from the harness to hook up the HID's and the high beam smaller guage wire is still intact with the stock harness. I go to flash the high beams and the highs don't shine.
12-20-2006, 04:50 PM
#320
Senior Member
Join Date: Nov 2005
Posts: 278
Originally Posted by Karim
You call that bashing??
I didn't see a quote in that post...did you? Fukk outta here...
I didn't see a quote in that post...did you? Fukk outta here...