4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Problem I've had for a LONG time

Thread Tools
 
Search this Thread
 
Old 05-27-2007, 12:57 PM
  #1  
Member
Thread Starter
 
97Max4Me's Avatar
 
Join Date: Mar 2004
Posts: 31
Problem I've had for a LONG time

My car will not start at times. Sometimes it will start fine, most of the time it takes a few tries, and occasionally it won't start at all. This started under warranty many years back and Nissan could never find the problem.

It started as a hesitation to start. Like it would turn over and over and over and then start. Like the battery was cutting in/out and the power would flutter. Well now, it won't do anything at all. Turn the key, all acc come on. Turn the key all the way over and everything cuts off. Repeat the process till the car eventually starts.

I've ground the starter with a 4 gauge wire, still no success. The car does have an aftermarket intake, well a CAI, not an actual intake manifold and a larger Y pipe. Other than that, it's stock.

I hope someone can help. My gf drives the car mainly and she's fed up with it, as am I. I'd like to fix it and sell it and never buy a Nissan again after the problems I've had with this one.

It's a damn shame when my 600hp LS1 never misses a beat and my beater can't even start..../rant
97Max4Me is offline  
Old 05-27-2007, 01:52 PM
  #2  
Junior Member
 
Benzmcs's Avatar
 
Join Date: May 2004
Posts: 25
I had a similar problem it turned out to be a bad ground on the battery that would cut out intermittently otherwise maybe its your starter btw thats the only problem ive ever had with max i love it great car
Benzmcs is offline  
Old 05-27-2007, 05:02 PM
  #3  
Member
 
Maxima9499's Avatar
 
Join Date: Aug 2006
Posts: 35
X2 on the ground, i've never had this problem on my Maxima, but we had this happen on my buddies Jeep on a wheeling trip and once on my Landcruiser during the rebuild. Good luck.

Kevin
Maxima9499 is offline  
Old 05-28-2007, 09:45 AM
  #4  
Member
Thread Starter
 
97Max4Me's Avatar
 
Join Date: Mar 2004
Posts: 31
I took it off yesterday, as I was in a big hurry, and just cleaned it up a bit where it mounts off the motor. It seemed to help so far. I think I'll try and just mount the ground directly to the block itself instead of off that bracket it hangs on.

Thanks for the suggestions.
97Max4Me is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kjlouis
4th Generation Maxima (1995-1999)
11
11-24-2018 06:09 AM
max_speed97
5th Generation Classifieds (2000-2003)
2
08-26-2015 07:46 PM
JMag90
5th Generation Maxima (2000-2003)
2
08-25-2015 09:17 AM
yat70458
5th Generation Maxima (2000-2003)
2
08-03-2015 01:16 PM



Quick Reply: Problem I've had for a LONG time



All times are GMT -7. The time now is 12:43 AM.