4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

torn steering rack boot

Thread Tools
 
Search this Thread
 
Old Jul 28, 2007 | 09:01 PM
  #1  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
torn steering rack boot

Well, it seems like i've been replacing all of my steering/suspension components one at a time on a monthly basis now. I've discovered that the driver's side steering rack boot (that covers the inner tie-rod) tore and has spilled all of it's grease onto the swaybar bushing. I'm pretty sure that i've been riding like that for a week now. I'm guessing that it wouldn't make sense to just do the boot because the inner tie-rod is about to self-desctruct and the amount of work involed in getting the boot on there, i might as well complete ALL of my suspension/steering work and just do the all the inner/outer tie rods along with new boots and steering rack bushings.
Old Jul 29, 2007 | 07:46 AM
  #2  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Okay??????????????
Old Jul 29, 2007 | 07:56 PM
  #3  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Sooo..is it similar to a broken CV boot where the joint dries out/gets contaminated?
Old Jul 31, 2007 | 05:34 AM
  #4  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Originally Posted by heynow
Sooo..is it similar to a broken CV boot where the joint dries out/gets contaminated?
It seems that nobody knows the answer to this question.
Old Jul 31, 2007 | 05:43 AM
  #5  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
First post doesn't seem to ask a question... Inner tie rod would go bad quicker w/o the boot I assume.
Old Jul 31, 2007 | 07:16 AM
  #6  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Sorry, the first post was kinda like me thinking out loud

So in order to just replace the boot, the outer tie-rod needs to come out, but the inner stays on as far as i know.
But in theory, if i've been driving with a torn boot for over a week, then it's better to just replace both tie-rods with the amount of work involved in just doing the boot, right?
Old Jul 31, 2007 | 09:27 AM
  #7  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Yes I would change the tie rods, it will make the steering feel much better.
Old Jul 31, 2007 | 11:40 AM
  #8  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Yeah man, out of all the things i've changed already, this should provide the most benefit I would be able to say that my whole suspension is rebuilt.
Old Aug 9, 2007 | 05:21 AM
  #9  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Helooooo, I just had my inner & outer tie-rods replaced on Saturday!. I must say that it's the most worthwhile thing that you can do to tighten up/smoothen your steering and increase steering response. I also had them change the steering rack bushings as well. No more shimmy or looseness in the stering wheel, yay!!!!

OH, and shiny new boots too
Old Aug 9, 2007 | 09:25 AM
  #10  
dgeesaman's Avatar
Maintenance Monster
iTrader: (10)
 
Joined: Jul 2001
Posts: 3,231
From: Harrisburg, PA
The inner tie rod is not greased. If the boot is torn and greasy stuff is coming out, that means your steering rack has bad seals and needs to be replaced.

Dave
Old Aug 9, 2007 | 11:21 AM
  #11  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
oh that's most wonderful news!!!! Unfortunately, i'm done spending money on that specific item.
Old Aug 10, 2007 | 05:45 AM
  #12  
heynow's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,132
Althouh i ALWAYS appreciate your input bro!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
Aug 15, 2024 12:30 AM
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
worldwiderecognized
6th Generation Maxima (2004-2008)
0
Sep 30, 2015 01:16 PM




All times are GMT -7. The time now is 08:15 AM.