4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

To people who want to do a 5speed conversion

Thread Tools
 
Search this Thread
 
Old 07-24-2001 | 03:45 PM
  #41  
cbr2's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Dec 2000
Posts: 468
The AUTO ECU does not have to be bypassed... As mentioned above... The ECU has no dealings with the mechanical driven process of 5-speed.. Though if you don't bypass the OD button you will set you check-engine light on.
Old 07-24-2001 | 03:52 PM
  #42  
cbr2's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Dec 2000
Posts: 468
- Are there any special brackets that need to be purchased?
Manula tranny has a differnet motor mount.. (if you buy a used tranny they might give it for free)
- Is there an intermediate shaft and does it have to be replaced with one from a 5spd?
What is this item?????
- I assume when you say "driveshafts", you mean the halfshafts/driveaxles?
Yes halfshafts.. They are different in a 5speed

- How is the clutch pedal affixed to the floorboard?
You drill the hole for the master cylinder (gives you 2 screws) and there is one factory unused hole already there

- Are there different clutch kits for different years and differen trannys? ie. GXE Tranny has x-amount of splines, therefore needs x-clutch kit, whereas SE tranny has x-amount of splines, there needs a different x-clutch kit?
To my understanding all are interchangable

- Do the hub/knuckles have to be modified to work with the manual driveaxles?
Nope this side is the same the holes in the tranny are why you need to change the shafts
Old 07-24-2001 | 03:56 PM
  #43  
cbr2's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Dec 2000
Posts: 468
Re: Doesnt the ECU look for>

Originally posted by MikeO
Doesnt the ECU look for the auto tranny to be in the PArk or Neutral position before it allows the engine to crank
Sorta.. But this is one plug w/ 2 wires... If you jump it (connect these 2 wires together) it starts fine.
Old 07-24-2001 | 04:19 PM
  #44  
Daniel B. Martin's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 4,601
Re: Doesnt the ECU look for>

Originally posted by MikeO
Doesnt the ECU look for the auto tranny to be in the PArk or Neutral position before it allows the engine to crank
Automatic or 5-speed, the Engine Control Module is not involved in the Inhibitor Relay circuit.
Old 09-24-2001 | 08:49 AM
  #45  
maximaracer28's Avatar
Senior Member
 
Joined: May 2001
Posts: 1,725
next spring i am going to do this conversion on my max...i just bought a 99 se-l and though its an auto i couldnt pass it up, dark green, beigle leather fully loaded...so next spring i will do this conversion...i will do mroe research on this and hopefully will be done soon...did you have any probs after install? i mean does it drive jsut like any other 5 spd max? any probs other then the abs that you ran into id like to hear about...thanks
Old 09-24-2001 | 09:07 AM
  #46  
hlh0501's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2000
Posts: 2,371
no other problems except now I want s/c and nos too... haha,
it runs awesome, I am extremely happy that I did the conversion now..
Old 09-24-2001 | 10:11 AM
  #47  
SuDZ's Avatar
Senior Member
 
Joined: Jul 2001
Posts: 7,530
Thats how it goes

Originally posted by hlh0501
no other problems except now I want s/c and nos too... haha,
it runs awesome, I am extremely happy that I did the conversion now..
Once everyone start they always looks for whats next bigger nd better The bug has got ya now.

SuDZ
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
mkaresh
8th Generation Maxima (2016-)
21
03-12-2018 06:48 PM
Calabar
4th Generation Classifieds (1995-1999)
3
10-05-2015 09:57 PM
REDinLV
New Member Introductions
1
09-28-2015 12:31 AM



Quick Reply: To people who want to do a 5speed conversion



All times are GMT -7. The time now is 11:17 AM.