Custom Guages
#1
Instead of going through the trouble and money of changing the guages, which is all that much or anything, I replace all the stock bulb in my 97 guages and replaced them with red ones from Wal-Mart. I like how its a different look. I also took a Sharpie marker and colored the needs, and replaced the bulbs in my Electronic AC Deck. It looks really nice, and most people think it came stock like that. If anyone wants to know how its done, just let me know, and I will give you directions.
#2
Originally posted by 97GreenMax
Instead of going through the trouble and money of changing the guages, which is all that much or anything, I replace all the stock bulb in my 97 guages and replaced them with red ones from Wal-Mart. I like how its a different look. I also took a Sharpie marker and colored the needs, and replaced the bulbs in my Electronic AC Deck. It looks really nice, and most people think it came stock like that. If anyone wants to know how its done, just let me know, and I will give you directions.
Instead of going through the trouble and money of changing the guages, which is all that much or anything, I replace all the stock bulb in my 97 guages and replaced them with red ones from Wal-Mart. I like how its a different look. I also took a Sharpie marker and colored the needs, and replaced the bulbs in my Electronic AC Deck. It looks really nice, and most people think it came stock like that. If anyone wants to know how its done, just let me know, and I will give you directions.
#3
The bulb size is 194, you will need 5 total. The fuel one is a different size, and I could not find red, so i colored that one with a red Sharpie marker. But it matched really well.
Steps:
1. Take the 2 screwes out from the top of the black guage peice, and pull that out very carefully.
2. Take the 3 screwes out that hold the guages in place.
3. Pull the guages out some, and unhook all the wires.
4. There are little turn peices that hold the bulbs in, take those out and replace the bulbs.
5. For the fuel guage, there is a turn peice that is marked fuel, take that out and color it with a red(or desired color) Sharpie.
6. Put all the bulbs back in place, screw the 3 screws back that hold the guagues in place, put the black peice back in place and screw that in.
7. Enjoy.
Steps:
1. Take the 2 screwes out from the top of the black guage peice, and pull that out very carefully.
2. Take the 3 screwes out that hold the guages in place.
3. Pull the guages out some, and unhook all the wires.
4. There are little turn peices that hold the bulbs in, take those out and replace the bulbs.
5. For the fuel guage, there is a turn peice that is marked fuel, take that out and color it with a red(or desired color) Sharpie.
6. Put all the bulbs back in place, screw the 3 screws back that hold the guagues in place, put the black peice back in place and screw that in.
7. Enjoy.
#4
If you need pictures, go here:
http://www.geocities.com/amixam69/nissan/dash/
http://www.geocities.com/amixam69/nissan/dash/
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
carid
Group Deals / Sponsors Forum
0
09-17-2015 05:00 AM