nismo2020

iTrader: (1)

i just picked up my autometer dual gauge pod. i put an autometer carbon fiber a/f gauge in it. i am going to move my 5" tach to above the center vents and then put the pod in. fuel pressure will be in the other hole. a carbon fiber nitrous pressure gauge will will go in the ciger lighter hole.
- if mike ever cleans out his garage his stillen short throw shifter will go in.
- i want to turn my hks intake into a cold air intake. i have it figured out in my head i just need to to take it to my muffler shop and have them bend me a pipe.
- going to schedule another dyno session for next friday. my only real power mod is removing the intake resanator and 2.5" mandrel bent cat back piping but i need to know!
the rest is just beautification(?) mods - new floor mats, replace a few broken trim pieces. i also plan on putting nos on my car but i a going to build it backwards -fuel pump, plugs, gauges, purge kit and then the actual kit.

SuDZ

Mine are minimal. I got my Air filter and strut bar in the mail yesterday. So I will throw these on this weekend most likely. Get them out of the way. After that I dont know what is next. Y pipe maybe?

SuDZ

BSwithTF

iTrader: (8)

It's supposed to be here within the week. I've heard it doesn't do much for autos but every little bit helps I guess.

Maxwell

ADDCO RSB!

asianmotorsports2000

Before NOPI (Sept 15)

Brushed aluminum dash kit...
Altezza Tail lights....
Diamond plate floor mats...
Levoc shift ****...
Carbon Fiber Brake Handle....
Strobe lights for turn signals and tail lights...
Full set of carbon fiber graphics...
Leather two tone red/black steering wheel wrap...
Aerospeed lowering springs install...

Big time wash, wax, and shampoo...(for the car)...

SuDZ

So they are mainly for 5 speeds? Or is it jsut that is where yo uwill notice the most power freed up?

SuDZ

AndyXXL

A new car

PRPmax

Umm lets see where to start were to start..
Wait I remember I have no money. So no mods till I pay off my BILLS..
Maybe for christmas santa will get me something.

DaMaxima

My next mod is gonna be a system upgrade with 2 12" Infinity Perfects and some kinda amp not sure yet.

PRPmax

Umm lets see where to start were to start..
Wait I remember I have no money. So no mods till I pay off my BILLS..
Maybe for christmas santa will get me something.

Maximus98

75 Shot NOS kit. Next week, hopefully, Don's VB and a Tranny cooler.

Sould be getting here, but not and now I am mad, Addco RSB, and new Clear Corners.

Got here, but needs to go back, cuz it doesn't fit? Indiglo gauges for my 98.

krismax

iTrader: (15)

Mod's next fix what i broke.
need a tranny
stock y pipe broke
check engine light on
flooding trunk now rusted
paint trunk(have to find leak first)


I raced at maxus like this,16 grueling runs,after driving for 7 hours no cool down.max abuse(:

BillN

I am looking forward to a serious stereo upgrade from my non-Bose stereo in the next few weeks!!

CAI, maybe a new front lip!!!

Viscous

Just curious, what are you planning to do about water infiltrating into the engine if you turn the HKS mushroom into a CAI? is there going to be some sort of bypass valve? Anyhow my next mod will probably be a random tech cat converter.

SB97MAX

Damn, that is harsh! 16 runs. I think my next mods will all be interior stuff, I have about every performance mod that I want. Take care

NeverEnough

First I have to fix a few things that are still wrong with the car, but then I will put on an RSB,FSTB and a new intake, y-pipe, b-pipe, headers and cat back are next, then new wheels tires and springs, etc.

Lee

loup1276

well i need this hot CT. weather to break, when it finally does i will install my ken z828 headunit mtx subs amps speakers etc. and my alteezas everyone luvs so much : ) i just ordered momo tuning pedals and next kyb and sprints... then i will save over fall/winter for 99 conversion, wheels and paint job for the spring... its just seams that even with my 3 jobs i don't have enough money for the mods i want to do...

Dreizehn

iTrader: (4)

Don's VB & Tranny Cooler

RedMax95

i getting some d*** nice chrome rims, installing the sprints in my room, gotta get the kybs for them, a trenz grille, and a rsb

sleeper

Zex Nitrous.

iansw

iTrader: (7)

Well, I've been waiting a month and a half for the Sprint Springs I ordered.....Alredy have the Tokico's sitting in my living room for a month. Tried to get them somewhere else, but the ENTIRE COUNTRY is on backorder....

Noone has them.....sigh...

So I'm going after a Y-Pipe next instead while patiently waiting for Sprint to get their heads out of their as*es.

IanS

metallic97gxe

iTrader: (3)

I'm almost running out of ideas...

headrests-tv's PS/Dreamcast(or some type of game system)
and a VCP DVD player-for my sons Jonah-2 1/2 years old and Ethan-7 months old so they will have something to do on long family vacation trips....with a switch so they can each whacth/play something different...up front for me and the wife a flip out screen with GPs...and DVD

get carpet dyed black...redo seats in black and silver

Billet valance insert to match grill......

maintain the mods I do have or at least make them last....

buy the rest of the STILLEN body kit.....

free flow cat converter

Nathan

iTrader: (28)

These will hopefully be all on before September 29th for a huge Import car show I entered in Toronto, Canada.

Stillen front lip
Apex lowering springs
Levoc shift ****
GTS clear headlight covers (already ordered)
Neon blue underbody kit
chrome & carbon fibre ebrake handle (already ordered)
polished intake manifold
more blue neon interior lights
side marker lights
upgrade interior speakers
custom amp rack with neon lights

24KP-I-M-P

im going all out im getting the dimond cut bumper lights
after that a fstb and a read one then some nice mags

Kevin Wong

I think I'm gonna get an oil cooler next. The benefits exceed the cost.

Jung918

Has anyone taken out their back seats for weight reduction? Does it make a noticeable difference? Im trying to get a custom y-pipe for around 100... but it's using my old y pipe and just cutting out the cats in their and welding on straight pipeing? Does anyone know if i can just drill the stuff out of the cats or is it too deep into the y pipe to even reach?

Maxima97GLE

my next mods are new struts, RSB, 17x8 rims with the widest tires i can put on 'em, and a catback exhaust

Brockster

iTrader: (3)

I'm getting new 17" rims and tires. Hopefully the ADDCO RSB that everyone in the forum is trying to aquire. After that, I'm trying to think of an interesting way to get side marker lights on the car. Any suggestions?

RedMax95

hey when did u get those red stripes on the front, i hadnt seen a pic of them on your car b4

NYCe MaXiMa

iTrader: (9)

Just let me know when.. so I can buy your mods If you are going to strip it down that is...


My next mods:
-Diamond cut clear corners
-20% window tint
-Factory spoiler
-New CD headunit

Coming later:
-16 or 17" 5 spoke rims
-New speakers all around
-Good amp
-2 10" subs with custom brackets so I can remove them when I please (incase I need the trunk room for something else.)
-FSTB
-RSTB
-RSB

Coming someday:
-Trenz grille or SE grille
-Stillen Body kit
-H&R springs w/ Tokico shocks

Shadow

iTrader: (15)

Before the NOPI Nationals on 9/15, Sarona body kit (that thing better get here soon) shaved moldings and trunk keyhole, IS300 blue paint (car is going into the shop Tues.) , custom black/blue door panels, rear seat, and new black carpet, Vitek wire covers (got hooked up by Vitek).

Before HIN Ft. Lauderdale 12/01 - polished intake manifold, KYB AGX shocks (whenever KYB decides to send them to me, then again can't complain because they're going to be free.) Maybe custom headliner and custom dyed dash.

Maxima97GLE

I got those a while ago... before the Liberty State Park meet. All my graphics are coming off next pay check for brand new and better ones. Looks almost the same but he's going to lay down yellow firt and place the red on top of it to cause a yellow shaddow over the current designs over the whole car. Also the hood logo for my auto club, my future stores name on the doors, and an extension of the hood graphics leading behind the rear passenger door and the pin stripe on the side will continue all the way to the tail light drop down to the bottom of the car and run forward to the end of my driverside door. It will be a sit to see

RedMax95

wow, thats cool, i want to get a kit for mine eventually, u will give us pics of course when u get it done, right?

shortchaz

next mod will most likely be an intake, probably WSP cold air unless I get convnced otherwise. Otherwise the next mod will be an Addco RSB, gotta get rid of the body roll. Then comes the springs and struts.

RPalka

Not sure if I am going to go get 20% tints or blue neon lights inside my car. hmmmmmm........

Nick Robinson

Well I need some tint, but first have to get my damn car lowered. Seems to be such a pain in the *** to do it. So some sort of shocks, then tint, then well a stillen kit (yeah right, thatll never happen) Oh also putting on mesh inserts.

Cumalot

iTrader: (8)

Look at my sig.

Maxima97GLE

I will definitly post pics when my graphics are done... i feel bad once i get my hands on $4,000 because I'm going to have to rip all my graphics off again when I repaint my car yellow.

RedMax95

you and shadow should have a poll for the wildest looking max when you r both done

97GreenMax

My next mod will be an RSB hopefully, or y-pipe or exhuast.