Motor Swap
10-12-2001, 01:25 PM
#1
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Motor Swap
I WAS WONDERING IF YOU COULD BOLT A TWIN TURBO 300Z IN A MAXIMA, I'M PRETTY SURE ITS THE SAME BLOCK, DOES ANYBODY KNOW ANYTHING ABOUT THIS, I KNOW IT WOULD REQUIRE A NEW ECU, BUT I DONT KNOW IF IT WILL ALL FIT UNDER THE HOOD....
10-12-2001, 01:30 PM
#3
Re: Motor Swap
Originally posted by FABRIKATOR
I WAS WONDERING IF YOU COULD BOLT A TWIN TURBO 300Z IN A MAXIMA, I'M PRETTY SURE ITS THE SAME BLOCK, DOES ANYBODY KNOW ANYTHING ABOUT THIS, I KNOW IT WOULD REQUIRE A NEW ECU, BUT I DONT KNOW IF IT WILL ALL FIT UNDER THE HOOD....
I WAS WONDERING IF YOU COULD BOLT A TWIN TURBO 300Z IN A MAXIMA, I'M PRETTY SURE ITS THE SAME BLOCK, DOES ANYBODY KNOW ANYTHING ABOUT THIS, I KNOW IT WOULD REQUIRE A NEW ECU, BUT I DONT KNOW IF IT WILL ALL FIT UNDER THE HOOD....
10-12-2001, 01:38 PM
#6
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Someone should start a fund for him to buy a new keyboard b/c obviously his caps lock is stuck and he either can't fix it or is too lazy to push the button. I'll let you decide which.
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
10-12-2001, 01:41 PM
#7
Supporting Maxima.org Member
Join Date: Oct 2000
Posts: 9,159
Oh boy. 
Originally posted by FABRIKATOR
Someone should start a fund for him to buy a new keyboard b/c obviously his caps lock is stuck and he either can't fix it or is too lazy to push the button. I'll let you decide which.
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
Someone should start a fund for him to buy a new keyboard b/c obviously his caps lock is stuck and he either can't fix it or is too lazy to push the button. I'll let you decide which.
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
10-12-2001, 01:42 PM
#8
Senior Member
Join Date: Nov 2000
Posts: 1,026
Originally posted by FABRIKATOR
Someone should start a fund for him to buy a new keyboard b/c obviously his caps lock is stuck and he either can't fix it or is too lazy to push the button. I'll let you decide which.
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
Someone should start a fund for him to buy a new keyboard b/c obviously his caps lock is stuck and he either can't fix it or is too lazy to push the button. I'll let you decide which.
__________________
Silver 1999 Mustang V6, MAC Cold Air Intake, 17" Borbet Type T's, H&R Springs with KYB AGX's
Co-President of the Minima Club of America
Part Time: B!tch
Full Time: Minima Hater
Report this post to a moderator
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
Have a nice day.
10-12-2001, 01:44 PM
#9
Originally posted by FABRIKATOR
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
somebody should start a fund for you so that you could buy the two extra cylinders that you should have got with the purchase of that piece of sh*t.....
Hint: since the engine code letters are different, chances are the blocks are different and fittment is questionable.
However, if you have $15k to $20k laying around doing nothing you can have a custom shop ATTEMPT it.....or just buy a used 300Z TT.
10-12-2001, 01:47 PM
#11
Senior Member
Join Date: Nov 2000
Posts: 1,026
Originally posted by bill99gxe
And someone should do an ounce of research before equating a VQ30DE block with a VG30DETT block, or do a FORUM SEARCH to find out if anyone else has asked this question.
And someone should do an ounce of research before equating a VQ30DE block with a VG30DETT block, or do a FORUM SEARCH to find out if anyone else has asked this question.
10-12-2001, 01:49 PM
#12
uh.. just someone who joined to give you guys a rise.
someone named fabricator, wanting to know about a swap? yeah right.
btw, it's 100% possible, just buy the engine and put it in. let us know when it's done.
have fun
someone named fabricator, wanting to know about a swap? yeah right.
btw, it's 100% possible, just buy the engine and put it in. let us know when it's done.
have fun
10-12-2001, 01:49 PM
#13
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Originally posted by Mustang1999
LOL... that's right... insult me.. see if I care.. I'm not as sensitive about things I read on the internet as you obviously are. Oh and BTW, if you would like to quote someone hit the "reply to post" button, makes it look neat and intelligable and someone just *might* want to read it.
Have a nice day.
LOL... that's right... insult me.. see if I care.. I'm not as sensitive about things I read on the internet as you obviously are. Oh and BTW, if you would like to quote someone hit the "reply to post" button, makes it look neat and intelligable and someone just *might* want to read it.
Have a nice day.
10-12-2001, 01:52 PM
#14
Originally posted by FABRIKATOR
your a funny guy...it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
your a funny guy...it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
Hint: Mustang1999 = woman
10-12-2001, 01:54 PM
#15
Senior Member
Join Date: Nov 2000
Posts: 1,026
[QUOTE]Originally posted by FABRIKATOR
your a funny guy...
Too bad I'm a girl and if you come back with sexist remark then you are an idiot.
it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
If it doesn't matter then don't get so worked up about it, I may drive a 6 cylinder, but then again so do you!!
Ironic isn't it.
your a funny guy...
Too bad I'm a girl and if you come back with sexist remark then you are an idiot.
it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
If it doesn't matter then don't get so worked up about it, I may drive a 6 cylinder, but then again so do you!!
Ironic isn't it.
10-12-2001, 02:01 PM
#18
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
[QUOTE]Originally posted by Mustang1999
i dont care if your male /female, cat or DOG...oh yeah i dont drive a maxima...240sx se
Originally posted by FABRIKATOR
your a funny guy...
Too bad I'm a girl and if you come back with sexist remark then you are an idiot.
it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
If it doesn't matter then don't get so worked up about it, I may drive a 6 cylinder, but then again so do you!! Ironic isn't it.
your a funny guy...
Too bad I'm a girl and if you come back with sexist remark then you are an idiot.
it dosen't matter how you attempt to insult me your still driving a 6 cylinder piece.....
If it doesn't matter then don't get so worked up about it, I may drive a 6 cylinder, but then again so do you!!
Ironic isn't it.
10-12-2001, 02:02 PM
#19
Originally posted by FABRIKATOR
i dont care if your male /female, cat or DOG...oh yeah i dont drive a maxima...240sx se
i dont care if your male /female, cat or DOG...oh yeah i dont drive a maxima...240sx se
10-12-2001, 02:13 PM
#22
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Originally posted by mzmtg
So why are you flaming a car that can beat yours. My damn Auto Maxima can beat yours.
So why are you flaming a car that can beat yours. My damn Auto Maxima can beat yours.
10-12-2001, 02:21 PM
#23
Senior Member
Join Date: Oct 2001
Posts: 474
Re: Motor Swap
Originally posted by FABRIKATOR
I WAS WONDERING IF YOU COULD BOLT A TWIN TURBO 300Z IN A MAXIMA, I'M PRETTY SURE ITS THE SAME BLOCK, DOES ANYBODY KNOW ANYTHING ABOUT THIS, I KNOW IT WOULD REQUIRE A NEW ECU, BUT I DONT KNOW IF IT WILL ALL FIT UNDER THE HOOD....
I WAS WONDERING IF YOU COULD BOLT A TWIN TURBO 300Z IN A MAXIMA, I'M PRETTY SURE ITS THE SAME BLOCK, DOES ANYBODY KNOW ANYTHING ABOUT THIS, I KNOW IT WOULD REQUIRE A NEW ECU, BUT I DONT KNOW IF IT WILL ALL FIT UNDER THE HOOD....
THERE IS SOME ON ON MAXIMA.ORG WITH NAME VITALIY FROM ARIZONA HE HAVE A 1989 MAXI WITH 300ZX MOTOR.
MY BROTHER HAVE 89 MAXI AND HE WAS THINKING ABOUT TO PUT 1989 SINGL TURBO 300ZX MOTOR FROM JAPAN CONVURTED FOR FRONT W.DRIVE
MOTOR AND LABOR I THINK $3000 OR $3500 .
IF YOU NEED MORE INFO LET ME KNOW I'LL TRY TO LOOK AT SOME OLD MAGZ AND I'LL SPEAK TO MY BRO HE IS HEAR ON MAXIMA ORG.AND WE LIVE AT THE SAME HOUSE. SO LET ME KNOW.
HAVE A NICE DAY!
10-12-2001, 02:22 PM
#24
Originally posted by FABRIKATOR
i just bought a 95 (no motor) and was told by the guy you could do the swap, either way i dont really care, he also told me about this site and said i could get all the info i need. i was lied to ....oh well.
i just bought a 95 (no motor) and was told by the guy you could do the swap, either way i dont really care, he also told me about this site and said i could get all the info i need. i was lied to ....oh well.
Oh yeah, find a new "guy" to get help from. Your current "guy" obviously doesn't know what he is talking about.
10-12-2001, 02:27 PM
#25
Senior Member
Join Date: Nov 2000
Posts: 1,026
Re: Re: Motor Swap
Originally posted by s600ergy
WASAP .
THERE IS SOME ON ON MAXIMA.ORG WITH NAME VITALIY FROM ARIZONA HE HAVE A 1989 MAXI WITH 300ZX MOTOR.
MY BROTHER HAVE 89 MAXI AND HE WAS THINKING ABOUT TO PUT 1989 SINGL TURBO 300ZX MOTOR FROM JAPAN CONVURTED FOR FRONT W.DRIVE
MOTOR AND LABOR I THINK $3000 OR $3500 .
IF YOU NEED MORE INFO LET ME KNOW I'LL TRY TO LOOK AT SOME OLD MAGZ AND I'LL SPEAK TO MY BRO HE IS HEAR ON MAXIMA ORG.AND WE LIVE AT THE SAME HOUSE. SO LET ME KNOW.
HAVE A NICE DAY
WASAP .
THERE IS SOME ON ON MAXIMA.ORG WITH NAME VITALIY FROM ARIZONA HE HAVE A 1989 MAXI WITH 300ZX MOTOR.
MY BROTHER HAVE 89 MAXI AND HE WAS THINKING ABOUT TO PUT 1989 SINGL TURBO 300ZX MOTOR FROM JAPAN CONVURTED FOR FRONT W.DRIVE
MOTOR AND LABOR I THINK $3000 OR $3500 .
IF YOU NEED MORE INFO LET ME KNOW I'LL TRY TO LOOK AT SOME OLD MAGZ AND I'LL SPEAK TO MY BRO HE IS HEAR ON MAXIMA ORG.AND WE LIVE AT THE SAME HOUSE. SO LET ME KNOW.
HAVE A NICE DAY
10-12-2001, 02:31 PM
#26
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Originally posted by mzmtg
You did get the info, it can't be done without a LOT of custom fabrication. It would be cost prohibitive. There.
Oh yeah, find a new "guy" to get help from. Your current "guy" obviously doesn't know what he is talking about.
You did get the info, it can't be done without a LOT of custom fabrication. It would be cost prohibitive. There.
Oh yeah, find a new "guy" to get help from. Your current "guy" obviously doesn't know what he is talking about.
10-12-2001, 02:34 PM
#28
Senior Member
Join Date: Nov 2000
Posts: 1,026
Re: Re: Re: Re: Motor Swap
Originally posted by s600ergy
DO YOU HAVE SOME THING AGANST RUSSIANS?
DO YOU HAVE SOME THING AGANST RUSSIANS?
10-12-2001, 02:40 PM
#29
Senior Member
Join Date: Oct 2001
Posts: 474
Re: Re: Re: Re: Re: Motor Swap
Originally posted by Mustang1999
No, I said Russ not Russian. Russ as in the person and if you have been on this board long enough you know what I'm talking about. Please turn your caps lock off, it's annoying to read things in all caps. Thank you.
No, I said Russ not Russian. Russ as in the person and if you have been on this board long enough you know what I'm talking about. Please turn your caps lock off, it's annoying to read things in all caps. Thank you.
10-12-2001, 02:55 PM
#30
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Originally posted by mzmtg
This guy must have serious emotional problems, he just sent me an Email calling me a d*ckhead.
This guy must have serious emotional problems, he just sent me an Email calling me a d*ckhead.
10-12-2001, 02:56 PM
#31
Re: Re: Re: Re: Re: Re: Motor Swap
Originally posted by s600ergy
OK I'M SORRY. AND HAVE A NICE DAY!
OK I'M SORRY. AND HAVE A NICE DAY!
Just a subtle reminder that you are being monitored.
10-12-2001, 03:02 PM
#32
Originally posted by FABRIKATOR
oh yeah...i have seriuos emotional problems, i'm a escaped mental patient with a history of violent and pysical out bursts, that has a thing for nissian's....i just like the way it sounds nniissssaann, so much better than "FORD MUSTANG"
oh yeah...i have seriuos emotional problems, i'm a escaped mental patient with a history of violent and pysical out bursts, that has a thing for nissian's....i just like the way it sounds nniissssaann, so much better than "FORD MUSTANG"
----------------------------------------------------------------------
From : "FABRIKATOR" <FABRIKATOR@HOTMAIL.COM>
To : ben_k_garner@hotmail.com
Date : Fri, 12 Oct 2001 15:32:46 -0500
This is a message from FABRIKATOR at Maxima.org Forums (
http://forums.maxima.org/index.php ). The Maxima.org Forums owners cannot accept
any responsibility for the contents of the email.
To email FABRIKATOR, you can use this online form:
http://forums.maxima.org/member.php?...rm&userid=7556
OR, by email:
mailto:FABRIKATOR@HOTMAIL.COM
This is the message:
YOUR PRETTY FUNNY **** HEAD.....
Draw your own conclusions...
10-12-2001, 03:20 PM
#33
Newbie - Just Registered
Thread Starter
Join Date: Oct 2001
Posts: 8
Originally posted by mzmtg
Well, you did send me Email calling me a d*ckhead...
----------------------------------------------------------------------
From : "FABRIKATOR" <FABRIKATOR@HOTMAIL.COM>
To : ben_k_garner@hotmail.com
Date : Fri, 12 Oct 2001 15:32:46 -0500
This is a message from FABRIKATOR at Maxima.org Forums (
http://forums.maxima.org/index.php ). The Maxima.org Forums owners cannot accept
any responsibility for the contents of the email.
To email FABRIKATOR, you can use this online form:
http://forums.maxima.org/member.php?...rm&userid=7556
OR, by email:
mailto:FABRIKATOR@HOTMAIL.COM
This is the message:
YOUR PRETTY FUNNY **** HEAD.....
Draw your own conclusions...
Well, you did send me Email calling me a d*ckhead...
----------------------------------------------------------------------
From : "FABRIKATOR" <FABRIKATOR@HOTMAIL.COM>
To : ben_k_garner@hotmail.com
Date : Fri, 12 Oct 2001 15:32:46 -0500
This is a message from FABRIKATOR at Maxima.org Forums (
http://forums.maxima.org/index.php ). The Maxima.org Forums owners cannot accept
any responsibility for the contents of the email.
To email FABRIKATOR, you can use this online form:
http://forums.maxima.org/member.php?...rm&userid=7556
OR, by email:
mailto:FABRIKATOR@HOTMAIL.COM
This is the message:
YOUR PRETTY FUNNY **** HEAD.....
Draw your own conclusions...
I DID AND I APOLOGIZE.....
Thread
Thread Starter
Forum
Replies
Last Post
AaronL
5th Generation Maxima (2000-2003)
15
08-08-2020 10:31 AM
spencerwh1
Maximas for Sale / Wanted
4
06-30-2016 05:44 AM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 05:42 AM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM
QueensMAX
5th Generation Maxima (2000-2003)
7
09-15-2015 04:14 AM