MEVI activation using Emanage Blue

Reply Subscribe

Thread Tools

Search this Thread

Oct 17, 2007 | 11:16 PM

jordandalley

Thread Starter

Supporting Maxima.org Member

Joined: Sep 2004

Posts: 538

From: Townsville, Australia

MEVI activation using Emanage Blue

Hi all - I have looked all around this place and have found nothing on how to use the VTEC feature on an old standard Emanage Blue to get the MEVI to activate.

I'm really wanting to ditch the old analog summit rpm switch and have the emanage do it all. Has anyone done this? Chime in...

Last edited by jordandalley; Oct 17, 2007 at 11:19 PM.

Oct 18, 2007 | 06:17 PM

jordandalley

Thread Starter

Supporting Maxima.org Member

Joined: Sep 2004

Posts: 538

From: Townsville, Australia

bumpedy bump anyone?

Oct 18, 2007 | 06:29 PM

pmohr

No more Maximas...

iTrader: (26)

Joined: Jul 2005

Posts: 14,329

From: Oak Ridge, TN

(hint) Searched (/hint) 'mevi emanage', came up with this - http://forums.maxima.org/showthread....t=mevi+emanage

Just find out what the VTEC activation feature outputs, ground or power, and wire up accordingly to your vac solenoid. Seems fairly simple to me...

Oct 18, 2007 | 06:42 PM

jordandalley

Thread Starter

Supporting Maxima.org Member

Joined: Sep 2004

Posts: 538

From: Townsville, Australia

Thanks pmohr. I just donated so I could use the search feature and found it pretty much straight away.

Still that post doesnt tell me anything.. I may just have to go into unchartered waters and do a write-up..

Last edited by jordandalley; Oct 18, 2007 at 06:45 PM.