OK guys, I just bought a new CAI from ebay. The intake does have the 3 nipples as suppose to but im concerned abt the lil rubber hole. Its a piece of rubber with a hole through it. What is that?

 

nice CAI

 

that's where you put the intake air temperature sensor. that looks like the Bomz intake that I bought a while ago. For me, the IATS fit snug in that hole, hasn't fallen out since.

 

Looks like the same exact CAI I got from Flea-Bay; same cheap *** blue filter, too

The intake is great, but change the filter...

 

How much did it cost? Are there anymore for sale?

 

thanks everybody, oh and yes i will definatly change the air filter. Tomorrow ima find the air temp sensor

 

I bought ti off of ebay for 37 bucks from eautoracing. they have plenty of most posting for the max.

 

that rubber gourmet is for the IAT. use a sealer with it otherwise it will fall out. cheap intake FTL

<----- should have gotten this kind of intake

 

I heard eBay.com has a lot of those kinds.

 

hey guys where is the iatc or that intake sensor. wha does it look like

 

Better yet, don't use the included midpipe with the rubber piece. It actually takes away a couple HP compared to the stock midpipe. I have this intake and the sound is harsh enough with the stock midpipe anyway.

 

that isnt the CAI that would need you to cut a hole down into the bumper right?

 

That's what I got, and that's what I did.

 

just for informations sake, cuz im not planning on doing this in the near future, how did you actually cut the hole? and did you run the pipe to the drivers or passengers side of the battery?

u got a pic?

 

The hole gets cut into the inner fender wall under the battery, not the bumper.

 

thanks guys, but where is the air intake temp sensor on the stock intake.

 

the "i support maxima.org" intake???

 

Naw the one that forces more air in intake. i got one do you

 

I didnt know you could get a "Maxima.org" intake, can I find one on e-bay?

 

It was a joke my friend lol

 

10chars

 

Im boosted so i have long cai that runs threw a ic. you can get that on ebay i know.

 

yeah i just ordered mine i cant freakin wait till it get here.

 

On my '95, it's a stuck right into the side of the airbox. it's a small sensor, two small screws hold it in, and there's a harness coming out if it, you can't miss it

 

Werd, just wanted to add that on 97+ it is in the tube before the intake and isn't held in by screws

 

so where do i run it to without an atac? and dammit it better say 'maxima.org' or im not buying

 

really im turboed thats why its a joke. I dont have a cai but i have a ram air intake.

 

i got the same intake too a couple years ago now, changed the filter right away, your IAC should be located (if i remember correctly near the bottom or back near midpipe on stock intake, after u find the 3 hoses its the last connector left if u still havent found it) i used the rubber that the new intake came with and its not loose at all. hope that helps

 

i have the same cai... took a guess, drilled a nice and clean 3'' whole with a whole saw and a drill took me ten minutes to do it and it fitted perfect...

 

i know man
guess im just too sarcastic
is that possible?

 

Do you have any pictures?

 

thanks guys, today I tried istalling it but the damn hose from the Idle valve was not connecting to the midpipe. so i just put back on the stock until i go to auto zone to get a correct size hose. Also i put in the intake sensor into the rubber but damn i really have to mash it in.

 

Any picture update on this? How was the install and how do you like it?

 

sorry i didnt get back to u guys. The install went great. But I didnt install the long pipe. I jus installed the short ram pipe with the air filter attach. Gettin ready for winter. I will try and take pics if it dont rain tomrrow. Just the one problem was puttin in the intake sensor, i had to glue it on with adhesive.

 

Good idea on not putting the cold air pipe, don't want to suck up snow!

 

i put my iat in the rubber grommet also but i don't think it works in there b/c the sensor is not long enought to stick out the other side of the grommet to let the air pass through the sensor

 

and also, there is a thread i posted about a tranny hose, will someone please tell me wtfxsup with that... i thought it went in that rubber gromment at first but i decided the iat is a better fit lol

 

youll be ok. mine is dangaling some where under my hood

 

abt the intake sensor, wut if i remove the rubber gromet and drill the sensor right onto the pipe and seal it up. WOuld dat work, or should i jus leave it the way it is.

 

i wouldn't go into too much work for it, it doesn't really do ****, just don't leave that hole open, fill it up with dirt and oil, that will clog it up lol jk don't do that..