4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Quality bump stoppers

Thread Tools
 
Search this Thread
 
Old Sep 6, 2008 | 12:34 PM
  #1  
GStrength's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Nov 2005
Posts: 672
Quality bump stoppers

I'll keep it simple. I recently dropped my car 2.2 inches in the front and 2.0 in the back. I changed my ball joints with cheap ebay ball joints a month ago. I noticed an annoying squeaky noise from the front under the car. It's coming from both driver and passenger side. When I inspected the vehicle, I noticed that both bump stoppers some how came loose and became stuck at the bottom of the strut. So I cut the bump stoppers off and now I dont have any on my front suspension? I assume that perhaps my struts are traveling to far and possibily causing a squeak noise, I have noticed struts making a squeak noise on other cars when travel is excessive. What is your take on my situation?
Old Sep 6, 2008 | 01:22 PM
  #2  
bigpulve+'s Avatar
Supporting Maxima.org Member
iTrader: (11)
 
Joined: Apr 2006
Posts: 11,656
From: Vermont
You most likely have bad sway bar endlinks.....that is a common squeaker. But its not advisable to drive with no bump stops......just get some OEM ones and cut them to fit right.
Old Sep 6, 2008 | 01:34 PM
  #3  
MorpheusZero's Avatar
Senior Member
iTrader: (10)
 
Joined: Nov 2004
Posts: 9,064
From: Santa Barbara, CA
What kind of ball joints did you get? Some of them you are supposed to pack with grease before you install them.
Old Sep 6, 2008 | 08:48 PM
  #4  
GStrength's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Nov 2005
Posts: 672
Are sway bar end links supposed to have allot of play or no? When my tire is off I can move them rather easily. Is that normal for the end link to move front right to left with no force?
Old Sep 6, 2008 | 09:42 PM
  #5  
Nismo's Avatar
Senior Member
iTrader: (18)
 
Joined: Dec 2000
Posts: 8,749
From: CA
I havent had bump stops for several years now. My Konis are still doing fine.
Old Sep 6, 2008 | 11:09 PM
  #6  
khantalha+'s Avatar
Senior Member
iTrader: (15)
 
Joined: Dec 2005
Posts: 6,601
From: Akron, Ohio
Originally Posted by bigpulve
You most likely have bad sway bar endlinks.....that is a common squeaker. But its not advisable to drive with no bump stops......just get some OEM ones and cut them to fit right.
+1
Old Sep 7, 2008 | 09:09 PM
  #7  
GStrength's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Nov 2005
Posts: 672
ok so i replaced my sway bar end links with moog, but the squeak continued. I'm going to change out the lower ball joints and replace the cheap ebay ones with a pair of moog ball joints. second i'm going to change all the bushings too. do you have to put any grease on the bushings when installing new bushings?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MaxLvr21
5th Generation Maxima (2000-2003)
14
Oct 17, 2015 12:11 PM
Need help
5th Generation Maxima (2000-2003)
23
Oct 2, 2015 08:56 AM
05RLS2
7th Generation Maxima (2009-2015)
5
Sep 27, 2015 09:24 PM




All times are GMT -7. The time now is 10:19 PM.