Wheel spacers and extended studs a few ????s
Wheel spacers and extended studs a few ????s
So i got 10mm spacers for the rear and 5mm for the front. Bought them off a friend of mine. Didnt get extended studs. My question is where can i buy them from? also how hard are they to install?? thanks in advance
i buy mine from ichibausa.com http://ichibausa.com/nissan3.html
nismos are too expensive.
make sure you get the 14mm knurl
they are only 2.50 a piece but they hit you with shipping being around $20. make sure you buy a few extra incase some break so you dont have to pay the shipping twice.
to install them i stack alot of washers on the stud and then tighten the wheel nut to pull the stud in. otherwise you have to take it to a shop to get it done 'proper'.
to take the old ones out you just hit em with a hammer.
btw i dont think you will need extended studs for the front with only 5mm spacers. I run 20mm spacers with 50mm studs to give you an idea of what you need for the rear. Im not sure what youd do with 10mm between the 35mm or the 45mm ones.
nismos are too expensive.
make sure you get the 14mm knurl
they are only 2.50 a piece but they hit you with shipping being around $20. make sure you buy a few extra incase some break so you dont have to pay the shipping twice.
to install them i stack alot of washers on the stud and then tighten the wheel nut to pull the stud in. otherwise you have to take it to a shop to get it done 'proper'.
to take the old ones out you just hit em with a hammer.
btw i dont think you will need extended studs for the front with only 5mm spacers. I run 20mm spacers with 50mm studs to give you an idea of what you need for the rear. Im not sure what youd do with 10mm between the 35mm or the 45mm ones.
Last edited by black_maxed95; Sep 10, 2008 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Andy29
5th Generation Maxima (2000-2003)
8
Sep 29, 2015 05:32 AM




