another "help im a lowering my car noob" thread
#42
#47
i believe D2's are the same price
i would stay away from anything tein. had a few friends that ran teins ( basics and super streets) and they all say those coilovers are a waste. i would choose between KSport, JIC, or ground control. these three is just personal preferences.
why lower a maxima at all?...
Coilovers:
KSport Kontrol Pro Kit (504)Fr and (392)Rr.
Megan Racing (448)Fr and (336)Rr.
Tein Basic Damper (390)Fr and (340)Rr.
JIC Magic FLT-FAX (448)Fr and (336)Rr.
JIC Magic VIP (448)Fr and (504)Rr.
Nex GT ()Fr and ()Rr.
Ground Control *made by Eibach* ()Fr and ()Rr.
Ground Control's website has an option to specify desired spring rate. Not sure what ranges you can specify.
KSport Kontrol Pro Kit (504)Fr and (392)Rr.
Megan Racing (448)Fr and (336)Rr.
Tein Basic Damper (390)Fr and (340)Rr.
JIC Magic FLT-FAX (448)Fr and (336)Rr.
JIC Magic VIP (448)Fr and (504)Rr.
Nex GT ()Fr and ()Rr.
Ground Control *made by Eibach* ()Fr and ()Rr.
Ground Control's website has an option to specify desired spring rate. Not sure what ranges you can specify.
why lower a maxima at all?...
#49
Best all around spring/strut combo Iv ridden on is what I had on my last max. Tokico illumias with Progress springs. I also had a set of MEP mounts/bump stop (I dont remember) on the rear. Had a perfect stance and the ride quality was amazing.
for my new 4th gen max Im actually contemplating saving up for the exact same combo or get some S-techs for the lower stance, but Iv heard nothing but harsh things about the s-tech until now. Saying illuminas on the softest setting will give the s-techs a nice ride sounds very encouraging.... might also save up for some coilovers....
for my new 4th gen max Im actually contemplating saving up for the exact same combo or get some S-techs for the lower stance, but Iv heard nothing but harsh things about the s-tech until now. Saying illuminas on the softest setting will give the s-techs a nice ride sounds very encouraging.... might also save up for some coilovers....
#50
A local guy had the same set up (S-Tech's/Illumina's) with them set on the stiff side (IIRC 4F/8R), told him to lower the settings and he said the ride was much better.
Last edited by ChrisMan287; 10-07-2010 at 10:13 PM.
#51
I never said they'd ride nice but they'll definitely ride better with the struts set on the soft side.
A local guy had the same set up (S-Tech's/Illumina's) with them set on the stiff side (IIRC 4F/8R), told him to lower the settings and he said the ride was much better.
A local guy had the same set up (S-Tech's/Illumina's) with them set on the stiff side (IIRC 4F/8R), told him to lower the settings and he said the ride was much better.
#53
Cattman has that special sale on Progress Springs with KYB AGXs. I'm debating if I should buy that kit, depending on how much shipping costs are.
Ground Control said they can use an Eibach spring that has a softer spring rate. They emailed me back to call them up to see what my wants/needs were.
Ground Control said they can use an Eibach spring that has a softer spring rate. They emailed me back to call them up to see what my wants/needs were.
#54
Cattman has that special sale on Progress Springs with KYB AGXs. I'm debating if I should buy that kit, depending on how much shipping costs are.
Ground Control said they can use an Eibach spring that has a softer spring rate. They emailed me back to call them up to see what my wants/needs were.
Ground Control said they can use an Eibach spring that has a softer spring rate. They emailed me back to call them up to see what my wants/needs were.
#55
Chrisman is lowered on KYB AGX's and Eibach's I think... we were talking on facebook the other day. Chris chime in, am I right?
#57
#58
i want to get new lowering springs. the idiot who had my car before me put on springs that didn't belong for a nissan let alone a maxima. i was told if i replace the struts (bc mine are blown) with factory struts, it is NOT advised to install lowering springs on factory struts.
how true is that?
how true is that?
#59
That is 100% true. These cars can't handle drops on stock struts. If you're looking to lower the car you'll need some performance struts. You can get either KYB AGXs, Tokico Illuminas or Koni Yellows.
#60
BTW- this is a great thread for those new to Maxima modding!
#61
#62
What is the best *budget* way to get a slight drop (aside from the OEM 5-spd springs). My struts were new last year (put on by the PO).
Reading the propaganda from TEIN, they say you can use their H-Tech springs with stock or OEM struts. Is this just marketing?
Personally, I want to do an inexpensive slight drop to close the gap on the new 17's I just installed. Once I step up to 18's, that's when I'd go to coilovers. Just don't have the bucks to do it all now.
Reading the propaganda from TEIN, they say you can use their H-Tech springs with stock or OEM struts. Is this just marketing?
Personally, I want to do an inexpensive slight drop to close the gap on the new 17's I just installed. Once I step up to 18's, that's when I'd go to coilovers. Just don't have the bucks to do it all now.
Last edited by Cebby; 10-11-2010 at 02:19 PM.
#63
I'm sure some cars can be dropped on stock or OEM struts, but Maximas cannot.
#64
What about the special that Cattman has? $550 for Progress springs and KYB AGX shocks. The Progress springs doesn't have an aggressive drop either, I think 1.7Fr and 1.5Rr.
And several people said the Progress springs ride well.
And several people said the Progress springs ride well.
#65
That's a pretty nice set-up there though, and for a great price too. I'd set the struts at 2F/4R and the ride should be nice.
#67
#68
i have a 1995 nissan maxima 3.0 engine.. I just replaced the water pump,thermostat and timing chain. When i put everything back together the car started fine. However it seems like i am not getting any power or spark to 3 of my coil packs.. Drives very sluggish feels like im in a 3 cylinder... Anyone have any sugesstions. I was wondering if theres a fuse or relay that controls the power to coil packs....
#69
What does this have to do with lowering the Maxima????????????????
i have a 1995 nissan maxima 3.0 engine.. I just replaced the water pump,thermostat and timing chain. When i put everything back together the car started fine. However it seems like i am not getting any power or spark to 3 of my coil packs.. Drives very sluggish feels like im in a 3 cylinder... Anyone have any sugesstions. I was wondering if theres a fuse or relay that controls the power to coil packs....
#71
hi this is my first post ,
im danny from ireland and want to lower A32 ,its 1996 2L v6 24v ,but with the econamy the way it is here im looking at getting springs from the salvage yard,which nissan model - springs would lower the car,
any help please ,so to hijack,honest
danny
im danny from ireland and want to lower A32 ,its 1996 2L v6 24v ,but with the econamy the way it is here im looking at getting springs from the salvage yard,which nissan model - springs would lower the car,
any help please ,so to hijack,honest
danny
#72
hi this is my first post ,
im danny from ireland and want to lower A32 ,its 1996 2L v6 24v ,but with the econamy the way it is here im looking at getting springs from the salvage yard,which nissan model - springs would lower the car,
any help please ,so to hijack,honest
danny
im danny from ireland and want to lower A32 ,its 1996 2L v6 24v ,but with the econamy the way it is here im looking at getting springs from the salvage yard,which nissan model - springs would lower the car,
any help please ,so to hijack,honest
danny
Tokico blues kit FTW
#73
I'm surprised that nobody comment on this.
Let me try to explain.
Oem strut mount = Oem suspension travel
Gabriel strut mount = Oem suspension travel + 1/2 an inch
So, if you are lowered and the strut mounts need to be replaced......
Let me try to explain.
Oem strut mount = Oem suspension travel
Gabriel strut mount = Oem suspension travel + 1/2 an inch
So, if you are lowered and the strut mounts need to be replaced......
Last edited by nhaven; 02-10-2011 at 07:48 PM.
#74
Last edited by VisciousMo; 02-10-2011 at 12:10 PM.
#75
sorry to thread jack but i am new to suspension too. alot of informative stuff on her btw. i pretty much have to redo my entire suspension once it warms up. Im not a huge fan of how high the stock look is. I want something that will look good lowered but also not make me bounce around like a civic with no wheel space. Is the progress/KYB setup a good way to go? I think it would be nice to be able to adjust seeing as I'm in chicago and would bring it up higher in the winter (stupid snow)
And Chris, you said something about doing 2F/4R. Does that mean a 2 inch drop in the front and 4 in the rear or do the numbers mean something different?
Again, sorry to thread jack ef9
And Chris, you said something about doing 2F/4R. Does that mean a 2 inch drop in the front and 4 in the rear or do the numbers mean something different?
Again, sorry to thread jack ef9
#76
sorry to thread jack but i am new to suspension too. alot of informative stuff on her btw. i pretty much have to redo my entire suspension once it warms up. Im not a huge fan of how high the stock look is. I want something that will look good lowered but also not make me bounce around like a civic with no wheel space. Is the progress/KYB setup a good way to go? I think it would be nice to be able to adjust seeing as I'm in chicago and would bring it up higher in the winter (stupid snow)
And Chris, you said something about doing 2F/4R. Does that mean a 2 inch drop in the front and 4 in the rear or do the numbers mean something different?
Again, sorry to thread jack ef9
And Chris, you said something about doing 2F/4R. Does that mean a 2 inch drop in the front and 4 in the rear or do the numbers mean something different?
Again, sorry to thread jack ef9
#77
I've tried searching for info on Ksport springs but I've got nothing. Anyone know how the car would ride with Ksports and AGXs? I have an I30 if that makes any difference. I was recommended S-Techs as opposed to the Ksports, so if you've got any input I'd love to hear it.
#78
Hello Im new here Ive had my 95 Max for three years just started modding it a year ago every since i put 18s with 245 45 18 tires on my car the ride quality has suffered another member suggested bc coilovers which i will be getting soon im new to the terms lowering and dropping the car can you fill me in are these things i need to do to my car as well also are there other things i should do besides get coilovers to improve my ride quality my mom has a bmw and i love how smooth her car rides so anything i can do to get me close to that would be great
#79
Do these strut mounts lower the front an extra 0.5"?
#80
That's what it looks like.
My question is, does anyone have any pics of the "drop" from the outside?
Edit: Wait, maybe not. After re reading what nhaven said about it, it looks like it just ads a half inch to the suspension travel. Will help keep your struts from bottoming out if you're lowered.
My question is, does anyone have any pics of the "drop" from the outside?
Edit: Wait, maybe not. After re reading what nhaven said about it, it looks like it just ads a half inch to the suspension travel. Will help keep your struts from bottoming out if you're lowered.
Last edited by Dooly; 02-15-2011 at 02:11 PM.