Where can I Find a MEVI?...
#1
Where can I Find a MEVI?...
Does anyone know of somewhere or someone who can get there hands on a complete MEVI Setup?.. Also does anyone in Texas know somebody who can install a MEVI or 00VI? Any help will be appreciated
#2
courtesy parts.com has them listed on their site.
http://www.courtesyparts.com/mevi-ki...Path=1783_5831&
http://www.courtesyparts.com/mevi-ki...Path=1783_5831&
Last edited by 99greddymax; 02-22-2011 at 09:06 AM.
#3
The Classifieds section have Both for sale, also the MEVI is relatively simple, only the 00VI requires a bit of know how and time. A MEVI could be installed by a 16 year old whos never touched a ratchet.
#4
courtesy parts.com has them listed on their site.
http://www.courtesyparts.com/mevi-ki...ath=1783_5831&
http://www.courtesyparts.com/mevi-ki...ath=1783_5831&
Yeah i did some research on installing a MEVI so i am good on that but if i got the 00VI is where i would have to get my help from.
#5
All motor has a rediculous amount of post and threads in it. There is a write up ect ect. There are alot of diffrent options that can be used in the 00vi. Im not going to spoon feed you the info. But if you want it that bad you will have to do the leg work. BTW
00vi>Mevi
all day
#6
go 00vi. With MEVI you LOOSE power at the bottom end and gain some at the top end.
00vi you keep the low end power the same, but GAIN a fair bit up top. And the gain up top is more then the gain from MEVI. If doing it the first time ever it will take about 2 days of working slowly and no rushing.
If you have someone who has already done helping you, it can be done in about 5 - 6 hours.
00vi you keep the low end power the same, but GAIN a fair bit up top. And the gain up top is more then the gain from MEVI. If doing it the first time ever it will take about 2 days of working slowly and no rushing.
If you have someone who has already done helping you, it can be done in about 5 - 6 hours.
#7
go 00vi. With MEVI you LOOSE power at the bottom end and gain some at the top end.
00vi you keep the low end power the same, but GAIN a fair bit up top. And the gain up top is more then the gain from MEVI. If doing it the first time ever it will take about 2 days of working slowly and no rushing.
If you have someone who has already done helping you, it can be done in about 5 - 6 hours.
00vi you keep the low end power the same, but GAIN a fair bit up top. And the gain up top is more then the gain from MEVI. If doing it the first time ever it will take about 2 days of working slowly and no rushing.
If you have someone who has already done helping you, it can be done in about 5 - 6 hours.
#8
There are numerous how-to's, there are also threads that that compile all the how-to's with all the troubleshooting threads into one. So look around, arm yourself with a FSM and make sure you got a drill press, or an e-manage system.
To find an 00vo head to classified here.
To find an 00vo head to classified here.
#9
PM me your e-mail address and I'll send you the 00VI Manual in PDF format.
#10
PM sent! Thanks a lot and lmk how your setup comes out..
Thread
Thread Starter
Forum
Replies
Last Post
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM