4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

no power to rear drivers door

Thread Tools
 
Search this Thread
 
Old Jun 20, 2011 | 04:57 PM
  #1  
NHMAX603's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2011
Posts: 220
From: NH
no power to rear drivers door

no power to the rear drivers door all lock or window checked wires changed harness checked fuses is there something im missing



95 se
Old Jun 20, 2011 | 05:16 PM
  #2  
aackshun's Avatar
Senior Member
iTrader: (3)
 
Joined: Aug 2007
Posts: 5,398
From: Houston, TX
If all of your other doors can lower/raise windows and lock and unlock, then check the master window switch.
Old Jun 20, 2011 | 05:58 PM
  #3  
NHMAX603's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2011
Posts: 220
From: NH
i replaced it completely .. ive tried all of the guts from the rear driver side in the passenger side all work over there if i had more hair id pull it out ive had the seats and interior out of my car 3 times now

F.M.L im putting all sorts of money into a car with 3 windows ..!! woooooooohooooooo i need a lip kit lol

Last edited by NHMAX603; Jun 20, 2011 at 06:06 PM.
Old Jun 20, 2011 | 08:49 PM
  #4  
aackshun's Avatar
Senior Member
iTrader: (3)
 
Joined: Aug 2007
Posts: 5,398
From: Houston, TX
Ok, then it's down to the wiring, I would next check with a Voltmeter to see if it's getting power, because each door is NOT on it's own fuse, but somehow maybe the wiring has gone bad.
Old Jun 21, 2011 | 04:43 AM
  #5  
xkazik's Avatar
Senior Member
iTrader: (14)
 
Joined: Mar 2007
Posts: 899
From: Nj
I had that problem. pm for the fix. can't type I'm at work
Old Aug 25, 2011 | 02:46 PM
  #6  
tiny2600's Avatar
Newbie - Just Registered
 
Joined: Aug 2008
Posts: 9
From: Dallas,TX
If you have not fixed the problem. I had the exact problem no power to drivers side rear door. It took me changing out the window switch. I checked with a volt meter and it had power going to the switch. I got another one and soon as I changed it the window/lock began to work.
Old Aug 25, 2011 | 04:28 PM
  #7  
NHMAX603's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2011
Posts: 220
From: NH
ive changed all switches in my car ive changed the wires to the door from the pillar ive checked with a meter 8.9 v to the door nothing works when my lites are on and i hit the window switches the lites dim this tells me there is a short im not paying to have this diagnosed this would be very pricey so someday i will tackle the issue by changing all the wires
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikesChevelle
Audio/Video/Electronics
1
Sep 11, 2016 06:36 PM
Dennis Twohy
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 06:01 PM
Huttig2009
5th Generation Classifieds (2000-2003)
8
Sep 25, 2015 03:31 PM
delerium75
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
2
Aug 19, 2015 11:08 AM




All times are GMT -7. The time now is 03:52 PM.