...and yes, I did use the search, but with no usable results.

The Budget y pipe that I put in my car has a hole in the flex section now and needs to be replaced.

The car is getting on in years with 180K now, and am just looking for a good replacement. I do have the OEM pipe, but is kinda rusty as it has sat in my shed, but is good.

What are some suggestions to replace the y pipe without spending alot of money. The car is not modded and is a well-maintained daily driver. Performance doesnt matter.

Please advise and thanks in advance.

 

You can buy a brand new SS flex section online then just have it welded in. No need to replace the entire y-pipe.

 

This!

No need to spend $200 or more on a new pipe. Just get the flex. If you can't weld it in yourself, I'm sure a shop won't charge you more then $35 to weld it in.

 

Sounds like a great idea to me... Thank you fellas for the advice. I'll call and ask a shop tomorrow about doing that that specializes in exhaust tomorrow.

Cheers!

 

any particular p/n you might have or where to buy from?

 

http://www.exhaustdepot.net/flexsection.html

 

All of the Above.....

 

What size diameter would be correct If I had a budget Y pipe?

 

2.5" IIRC.

 

6" or 8" length? also will the shop have to remove the y pipe from the car to install a new flex section?

 

My guess would be 8" but don't quote me on that. They shouldn't have to remove the y-pipe.

 

chris dude 2.5" looks to be the right diameter but the length I just measured was close to 10" between welds where that flex section was in. FYI, can someone confirm the budget flex length is 10" 2.5" in diameter?

Thanks,
Jason

 

will this work?

http://www.summitracing.com/parts/SUM-652510/