4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

96 gle rough idle

Thread Tools
 
Search this Thread
 
Old 08-08-2011 | 02:58 PM
  #1  
joseph.mcgowen's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 72
From: Lake co. Fl
96 gle rough idle

it feels like the piston is hitting hard but it is not consistent. almost like a random miss but i have had it scanned a few times and no codes at all, and it seems to only happens when in gear stoped at a light or something
Old 08-08-2011 | 10:33 PM
  #2  
clive's Avatar
100% chingon
 
Joined: Oct 2005
Posts: 1,003
the piston is hitting hard

Do you mean that the car is missing at tickover, but drives normally? If so, I bet it will be a bad injector. Try putting a load of injector cleaner in the tank. if it goes away for a while then that's the cause.
Old 08-08-2011 | 10:44 PM
  #3  
JNCoRacer's Avatar
Just the tip.
iTrader: (6)
 
Joined: May 2003
Posts: 2,988
From: Plano, TX
No, this is transmission related. Its either the torque converter or the valve body. My 99 i30 does the same thing. It doesnt happen all the time, and if you put it in neutral or park it smooths out.
Old 08-09-2011 | 10:22 AM
  #4  
clive's Avatar
100% chingon
 
Joined: Oct 2005
Posts: 1,003
If putting the car in gear affects the idle, then the IACV is filthy or otherwise not working properly.
Old 08-11-2011 | 04:00 PM
  #5  
joseph.mcgowen's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 72
From: Lake co. Fl
@jncoracer how do i check to see if that is my problem because when i first bought the car i had a code for the shift solenoid but the code just went away so i never thought any thing of it.but the same thing if i put in park or neutral it smooths out but i can still feel it a little
@clive wouldn't the iacv throw a code? i will remove it and clean it any way it cant hurt it is filthy. i don't know what tick over is and if it was an injector wouldn't it be consistent? sometime it feels like three cylinders are missing back to back sometimes it feels like every other cylinder is missing its just never the same and it doesn't seem to have lost any power
Old 08-12-2011 | 08:12 AM
  #6  
cashoit's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 4,011
From: Worcester, MA
new shift solenoids will make the car feel brand new man. If u wanna go that route.
Old 08-14-2011 | 01:54 PM
  #7  
joseph.mcgowen's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2011
Posts: 72
From: Lake co. Fl
where can i get shift solenoids i cant find em on the autozone website and any tips on the job would help
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 08:01 PM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 06:42 AM
salty318
7th Generation Maxima (2009-2015)
7
09-29-2015 02:21 PM
salty318
7th Generation Maxima (2009-2015)
1
09-28-2015 08:22 PM




All times are GMT -7. The time now is 12:56 AM.