confusion on fuel pressure
#1
confusion on fuel pressure
hey guys im having starting problems and i think i narrowed it down to fuel
im reading the FSM
i get about 34psi pre start and the FSM calls for 43psi
at idle im getting 32psi FSM calls for 34psi
testing the regulator it says as vacuum INcreases the pressure should DEcrease
i dont have a vacuum pump so i open the throttle from the TB creating vacuum and the pressure INcreases to about 35 psi
so its doing the opposite of what the FSM says it should does that sound right ? shouldnt it pressure increase as vacuum increase
any thoughts?
im reading the FSM
i get about 34psi pre start and the FSM calls for 43psi
at idle im getting 32psi FSM calls for 34psi
testing the regulator it says as vacuum INcreases the pressure should DEcrease
i dont have a vacuum pump so i open the throttle from the TB creating vacuum and the pressure INcreases to about 35 psi
so its doing the opposite of what the FSM says it should does that sound right ? shouldnt it pressure increase as vacuum increase
any thoughts?
#2
You are confusing manifold vacuum and venturi (TB) vacuum. FPR uses mani vacuum. Direct relation to engine load, not RPM.
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM