O2 Sensor
O2 Sensor
I need a RH o2 sensor. Autozone only lists 2. "Front manifold" and "rear manifold". Common sense tells me that I need the one labled "rear manifold". Just wondering why they don't list three. The two manifold sensors are the same aren't they? Any one run into this recently? I do need the one labled "rear manifold", right?
Thanks, Zack
Thanks, Zack
Re: O2 Sensor
Originally posted by Zack_Rad
I need a RH o2 sensor. Autozone only lists 2. "Front manifold" and "rear manifold". Common sense tells me that I need the one labled "rear manifold". Just wondering why they don't list three. The two manifold sensors are the same aren't they? Any one run into this recently? I do need the one labled "rear manifold", right?
Thanks, Zack
I need a RH o2 sensor. Autozone only lists 2. "Front manifold" and "rear manifold". Common sense tells me that I need the one labled "rear manifold". Just wondering why they don't list three. The two manifold sensors are the same aren't they? Any one run into this recently? I do need the one labled "rear manifold", right?
Thanks, Zack
There are 3 O2 sensors:
One for each bank of cylinders before the precats and one after the rear/main catalytic. I don't remember which is the right hand one. The length of the wires/connectors are different.
One for each bank of cylinders before the precats and one after the rear/main catalytic. I don't remember which is the right hand one. The length of the wires/connectors are different.
Originally posted by Chunger
There are 3 O2 sensors:
One for each bank of cylinders before the precats and one after the rear/main catalytic. I don't remember which is the right hand one. The length of the wires/connectors are different.
There are 3 O2 sensors:
One for each bank of cylinders before the precats and one after the rear/main catalytic. I don't remember which is the right hand one. The length of the wires/connectors are different.
Originally posted by KGBSJU
different part sorry
different part sorry
Most of us are here to give helpful information when we can... whether a lengthy explanation or just to add some additional info.
I know which one I'm trying to replace. the one nearest the firewall. Just don't know how autozone has them listed since they only have two. If the two that are nearest the engine are different, I guess that autozone just doesn't carry the one near the cat. I'll figure it out in the morning.
Check the Courtesy Nissan website, complete with diagram and prices.
http://www.courtesyparts.com/A32_O2-sensors.html
http://www.courtesyparts.com/A32_O2-sensors.html
Re: O2 Sensor
How come you need to replace the 'rh o2 sensor?' That to me sounds like the rear heated o2 sensor. If that is correct then both parts at autozone will be incorrect. The correct one is located at the end of the cat.
Originally posted by Zack_Rad
I need a RH o2 sensor. Autozone only lists 2. "Front manifold" and "rear manifold". Common sense tells me that I need the one labled "rear manifold". Just wondering why they don't list three. The two manifold sensors are the same aren't they? Any one run into this recently? I do need the one labled "rear manifold", right?
Thanks, Zack
I need a RH o2 sensor. Autozone only lists 2. "Front manifold" and "rear manifold". Common sense tells me that I need the one labled "rear manifold". Just wondering why they don't list three. The two manifold sensors are the same aren't they? Any one run into this recently? I do need the one labled "rear manifold", right?
Thanks, Zack
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
my03maxima
7th Generation Maxima (2009-2015)
9
Jul 28, 2024 07:40 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
Sep 28, 2015 09:01 PM




