4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

quick reply needed, lowering spring

Thread Tools
 
Search this Thread
 
Old Apr 6, 2013 | 07:30 AM
  #1  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
quick reply needed, lowering spring

hello, im doing the suspension on my 97, and the top of the strut says out, with a notch below it, is this to face the tire?
Old Apr 6, 2013 | 07:36 AM
  #2  
cjandura's Avatar
Banned
iTrader: (3)
 
Joined: Nov 2006
Posts: 3,622
From: WestChester,PA.19380
Originally Posted by steezmuffin686
hello, im doing the suspension on my 97, and the top of the strut says out, with a notch below it, is this to face the tire?
Yes
Old Apr 6, 2013 | 02:22 PM
  #3  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
Originally Posted by cjandura
Yes
love the look of it bein lowered, thanks for the help homie!
Old Apr 6, 2013 | 02:24 PM
  #4  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
what lowering springs do you have?
Old Apr 6, 2013 | 02:31 PM
  #5  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
Originally Posted by theblackone3.5
what lowering springs do you have?
tein s-tech's with the lotek shock and struts off ebay. i love the ride i might say for 168$ spent on the budget stuff..not too shabby, they look like gr-2 knockoffs. and honestly a old member 95custommaxima used to live down the street from me and had the tein/gr2 setup. i swear mine feels the same. now to see what their doing 10k miles from now is a different situation.


however, after doing axles and valvoline 80w90 gl-4 rated gear lube, i geta wierd hum under load around 3500rpm, not a wheel bearing seeing as i inspected for play and nothing. so idk if the axles are wrong but its strange.

axles were purchased from oreilly, and are item number...

60-6144 and 60-6145.

anybody know if these were wrong? or if new axles in these cars make funny noises? ( dumb but..) they slid into the trans no problems and fit in the hub nicely. they both look/seem to be completely in, seeing as the carrier lined up no problems, and the drivers side was a good click. any thoughts??

wasnt makin that noise before all was said and done.
Old Apr 6, 2013 | 02:39 PM
  #6  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
what are some good shocks and struts to put on the tein lowering springs. I need new struts on the max. Just trying to find somes that have great quality. I had eibach springs but i like the tein springs better.
Old Apr 6, 2013 | 02:43 PM
  #7  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
Originally Posted by theblackone3.5
what are some good shocks and struts to put on the tein lowering springs. I need new struts on the max. Just trying to find somes that have great quality. I had eibach springs but i like the tein springs better.
kyb gr-2's
Old Apr 6, 2013 | 02:50 PM
  #8  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
Do you have to replace the axles when you put lowering springs on? What wheel are you running? Any offset?
Old Apr 6, 2013 | 03:22 PM
  #9  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
Originally Posted by theblackone3.5
Do you have to replace the axles when you put lowering springs on? What wheel are you running? Any offset?

no i replace them cuz both had torn boots and were clicking. i have 03 max wheels w/ 225/50/17 tires. its a 17x7. idk the offset by chance, but they look damn nice.
Old Apr 6, 2013 | 03:34 PM
  #10  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
I have the 2k2 rims powder-coated!!! R urs powder-coated? You have wheel spacers on the max? What brand of tire r u runnin.
Old Apr 6, 2013 | 08:05 PM
  #11  
steezmuffin686's Avatar
Thread Starter
Member
 
Joined: Nov 2010
Posts: 216
From: Milwaukee WI
Originally Posted by theblackone3.5
I have the 2k2 rims powder-coated!!! R urs powder-coated? You have wheel spacers on the max? What brand of tire r u runnin.
no spacers, idk if i should have em, i have cooper crap tires, and next weekend ima rattle can em glossy black, cant afford powder coating! lol.
Old Apr 6, 2013 | 08:34 PM
  #12  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
get 25 mm spacers for the rear so it sits flush, and a little more aggressive stance.
Old Apr 6, 2013 | 08:43 PM
  #13  
maxprivate's Avatar
Black Lion
iTrader: (12)
 
Joined: Sep 2005
Posts: 2,671
From: NJ, Down by the River
How much are you guys finding your spacers for?
Old Apr 6, 2013 | 09:27 PM
  #14  
theblackone3.5's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2012
Posts: 707
i think their around $50 to $100.
Old Apr 7, 2013 | 11:01 AM
  #15  
maxprivate's Avatar
Black Lion
iTrader: (12)
 
Joined: Sep 2005
Posts: 2,671
From: NJ, Down by the River
Cool thanks, Ebay them for that price range.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dank4us
7th Generation Maxima (2009-2015)
34
Jun 10, 2024 03:45 AM
homeyclaus
Maximas for Sale / Wanted
1
Sep 3, 2015 06:15 PM
twotonezed
7th Generation Maxima (2009-2015)
17
Aug 16, 2015 08:10 PM
Samuel1021
Wheels/Tires
0
Aug 16, 2015 03:01 PM
twotonezed
7th Generation Maxima (2009-2015)
2
Aug 16, 2015 11:41 AM




All times are GMT -7. The time now is 09:51 AM.