max83

ok well I have no turn signal now ,I follwed the instructions from maximadriver.com and cut the black wire(ground i assume)from the side lamp and spliced it into the green(power i assume)frome the turn signal all that did for me was blowing many fuses... I must be missing something cause this is not working....... any advice would be greatly appreciated ....i really need turn signals

thanks
john

benny

iTrader: (6)

You must used the black wire conected to the lamp to the green wire.

95emeraldgxe

hold on a second........did u follow the instructions for the blinkers or the corner lights?? They are different

max83

I used the instructions for the blinkers... and i took the black wire from the smaller lamp and wied it to the green wire from the bigger lamp

Romeo

i know what you're talking about. i tried to do it and i blew fuses too. that's kinda weird since on my 95 gxe, i did it the first time and it worked.

\

maximus75

iTrader: (5)

The black wire that you cut, did you use the end coming from the lamp, or the end coming out of the harness to connect to the green wire?

Romeo

i cant remember, i see your point though. that would definately cause it to blow fuses.

krzymax

iTrader: (2)

get a #10 fuse

max83

the black wire is from the lamp and thanks the larger fuse helped but still how do i rewire the blinkers

paul4b

Dumb question:

I looked on the maxdriver website, but I cannot find what the blinker mod is for?

Thanks!

paul4b

Hey - that's pretty cool.

Thanks!