ECU Code 15/2
04-19-2002, 06:05 AM
#1
Lifetime Maxer
Thread Starter
Join Date: Mar 2001
Posts: 480
ECU Code 15/2
Hey - I performed the ECU diagnostic according to the instructions in this post. I watched the pulses like 6 times to make sure I got the numbers exactly correct. The code is got was 15 short pulses, 2 long pulses. BUT, when I use the decoder tool it says "UNDEFINED"! Anyone else ever get this code??
-Chad
-Chad
04-19-2002, 01:45 PM
#3
Lifetime Maxer
Thread Starter
Join Date: Mar 2001
Posts: 480
I actually had the Nissan dealer run the 15/2 code for me, and they said it was the gas tank pressure sensor. (they had a fancier name for it). Apparently there's a valve that opens when there's too much pressure in your gas tank, and my valve wasn't operating correctly this morning. I reset the light and I'll see if it happens again.
-Chad
-Chad
04-19-2002, 02:50 PM
#4
Junior Member
Join Date: Aug 2001
Posts: 22
Re: ECU Code 15/2
The code you are getting is 0215. Even though it is undefined..if you do a search, it has something to do with the Evap Control System mounted under the car behind the left rear wheel. My car has been gicing this code for over a week...I'll reset it..it'll go away for about 20 miles, then the light will come back on.
I've checked for water and the operstion of the solenoid, but the ses light continues to come on.
Good luck
I've checked for water and the operstion of the solenoid, but the ses light continues to come on.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM