tifosiv122

iTrader: (2)

Busy?!?, you don't do anything...not like your setting up a NE Webpage or anything...lol...

BTW, since your busy and I'm not I looked up the Belkin thing. They still sell it and it has an updated body:

http://catalog.belkin.com/IWCatSecti...tion_Id=200343

Erik

CKNY

iTrader: (1)

sorry for the confusing post, i was pretty tired =)

regarding the screen... it's just a screen and cd player correct? it does not have a built in am/fm tuner right? does the master unit have a am/fm tuner? if so - how do you control the tuner? remote control?

tifosiv122

iTrader: (2)

Yeah, the screen is just a screen and CD player. Pioneer makes just the screen, screen/CD, and screen/dvd. The master unit controls AM/FM. The screen/cd doesn't come with a remote, so you use the one that comes with the master unit, but in my case I use the one that came with the Navigation unit (I actually have three remote controls, but everything works off of 1). The 7000 master unit is very basic. The 8000 adds visual effects (eye candy). The 9000 is a waste because all it adds is 5.1 support and unless you have a center channel in your car its useless.

Erik

DAREN

iTrader: (3)

lolololololololololololol


more fiyah!!!! more fiyah !!!! every body know seh bad mind people fi get bun. *** now han inna di air an mek mi here yu!
(shabba ranks Love punani bad beat thumping in the background:loud)

MORE FIYAH!!!!!! MORE FIYAH!!!!!!

trinity000

love the security led i did mine last week and love it!

now the challenging one is the cruise control i have tried and not succeded... i got the led to work and light up when i power it will right voltage when it isn't back in the casing... but i can't get the contacts to work right when i put it all back together to my cruise control offically doesn't work! lol oh well... i think it might be a fuse... or a CEL that hasn't cleared as i did get a CEL at first but then the light when off (i was moving the metal over the contacts to test the led and gave me a CEL dumb me lol)

if anyone could offer any help it would be much appreciated

MaximaPower

iTrader: (3)

there's two different leds....blinking led and led
i would need blinking led rite? or will the regular
one work fine? i can't seem to find a blinking blue
led..only see red, green, orange, and yello

trinity000

i used a regular led as the car will take care of the blinking... i used a 276-311 from radioshack despite what tif says... and if you want more bright blue then deep rich blue use a 276-313

tifosiv122

iTrader: (2)

Contact Don (MyPearlTPI@aol.com) he has plenty of the blue flashing LED's and thet are much brighter then the Radioshack ones plus they are very simple to wire.

Erik

trinity000

what is the mcd on them? 3000? 400 mcd difference isn'much but it is a matter of preference...

and they all wire the same one lol hehe (sorry had to poke fun at that one)

tifosiv122

iTrader: (2)

Not really, his are 12V ready...the ones you get at radio shack aren't....if you want them to run when you remove the key you need to adapt them to work off a 12v source...mine turns on even if my alarm isn't. I'd rather have it blink with it off then not blink with it off...sometimes I forget to arm it...

Erik

trinity000

umm as far as that goes they stock one isn't 12v! there is a tiny resistor in there which drops the voltage... so even with a 12v led it won't matter as the same signal is going to it... that point is rather mute unless you choose to rewire the security led not just replace the led... i used the stock resistor just replacing the led and leaving the rest the same

tifosiv122

iTrader: (2)

Yeah, thats why my led is really really really bright! I bypassed the factory LED and switch. I just used the housing and wired it directly to the car so when I remove the key it automatically lights up.

Erik

trinity000

ok that a bit differnt but trust me even the blue one i have is enough to light up my drivers seat well! so if it is brighter then that DAMN more power to ya but i wanted to keep stock function just blue in color