Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)
3. Maximo-SE (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 2x (depending if it has adapters or not)
2. mitymax03 2x (depending if it has adapters or not)
3. SoulEater 2x (depending if it has adapters or not)

Map Lights:
1. Souleater (depending if it has adapters or not)

 

FYI the map lights are not wedge so i dont think an adapter will be included....but it really easy just splice and tap. if you can do speaker wire you can do this.

 

i cant wait, i cant wait

install should be plug and play i believe? sorry i cant read so any help is again appreciated.

 

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)
3. Maximo-SE (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 2x (depending if it has adapters or not)
2. mitymax03 2x (depending if it has adapters or not)
3. SoulEater 2x (depending if it has adapters or not)

Map Lights:
1. Souleater

Give the holidays my friends place didnt work over the weekend. sooo he'll place the order today. i'll keep everyone updated.

 

in production as we speak. i should be getting them by the end of the week.

by the weekend i'll send out all invoices. then ship out according to who pays first.

 

Please post pipcs of the wedge adapter when you get the completed pieces, thanks.

 

got them in today. i'll be posting pics within a day. and they DO have the adapters from the ones i checked.

 

can't wait

 

If you have an extra dome light (the main one, not the map light) I WANT ONE. I am also interested in the license plate light too.

PM and I will check tomorrow,

Atlridin

 

whens the GD starting? let me know

 

the wedge adapter


the dome light adapter


the dome light board


the map light board

 

aaand what most of you are interested in the lic plate boards.



I've tested everything and they all work more than expected. the dome light to match the doors is VERY bright and fits like a glove, as well as the map lights.

the lic plates. i'll have to have more time getting the fit right, it started to rain and i couldn't work anymore but it looks like some minor modifications will be needed. of course i will have instructions on what to do. please be patient.

As for a GD. after this 1st group of people get theirs i hope they post pics and what they think about them in the 5th gen forums. then if there is a large demand I can ask for more of an ongoing thing maybe 5 or 10 people at a time.

 

Where are the pics of the door lights?

 

start of the thread, those have the most pics as i got those installed and everything.

 

How much for everything 'cause I'm ready to pay!!! I want get the door and dome lights as well, but i need to see my license plate and map lights first. if they good (in colors and brightnest), i'll get the rest.

 

Paypal address? I've been ready to pay

Edit: If you have 2 extra map lights, I'll take those too!

So in total for me:

2x door
1x dome
2x maplight (if available)

 

awww man N3985! lol i didn't know anyone else was interested in the map lights...there was only one interest in those so i had him only make one.. sorry. but one step at a time. i need to fit EVERYTHING in before I start accepting money i want to make 100% sure everything fits easy for you guys. once i send out the invoices it'll have all the info ready for ya. meanwhile if you are interested in something else create a 2nd list.

 

Haha, take your time, I appreciate you test fitting the pieces to confirm fitment. Rest assured my $ is ready and waiting, not going to bum out

 

no prob, well they all fit perfectly, its the casing that goes over it is the main "problem" doors, dome and maps all fit over fine. but since the lic plate housing is soooo small it's difficult.. BUT doable.

 

the pictures are a little off they are actually more crisp, the reflection off the lic plate make the LEDs seem "too bright" IMO i think they are near lexus brightness. the 2nd pic is the best rep of it.

on the other side i have polarg hyper white wedge bulb

 

Fitment in the clear casing



To make these puppies fit correctly you'll have to sand down a little border 5 min job with any sand paper.

Also had to sand down the led bulbs as they are round and took up too much depth. (this will be done for you)

 

so if i wanna buy a pair... pm?

 

the previous list was already ordered. you need to start a new list


Round Two:

Lic Plates:
1. Yaco_Max

Doors:

Dome:

Map Lights:
1. N3985

 

Let me know if you ready to send me the invoice. Can't wait for it to see with my own eyes. Send the invoice to my email Eddie82manson@yahoo.com. And btw, how much for the map lights. you didn't list the price on the 1st page.

 

sorry i wasn't planning on asking these to be made but why not!?!? haha they'll be close to the 18 LED price. $38.00
those have not been fitted yet, i placed them in and everything but you'll have to splice these in, no adapters available. as of now only 1 org member will have map led lights. (not me....)

i'll be sending invoices soon enough.

 

are the map lights for the '00-'01 maxima? 'cause the '02-'03 have different housing. i just wanna make sure

 

oh crap didn't realize they were different. sorry i'll specify

map lights are for a 5th gen w/out sunroof. you'l have to measure yourself if you have a 5.5 gen or sunroof or other....i posted the measurements on the 1st page i believe.

 

i cant wait for them door lights...

 

all invoices sent. Lic plate orders give me a couple more days i need to sand them down, test fit. etc etc before i send them out. sorry! but i really want to make sure they fit on ok for you guys. i'm only one person and i work full time. etc etc. blah blah blah haha

 

Round Two:

Lic Plates:
1. Yaco_Max
2. maxximaa(x2)

Doors:
1. maxximaa (X2)

Dome:
1. maxximaa(x1)

Map Lights:
1. N3985
2. maxximaa(x1)


p.s. please p.m. with pricing and payapl.
thanks!!

 

so all this (dome,door,lic. and map lights) come with adapter which makes it plug and play? sorry i havent been reading...

 

Dome, Door (wedge), and Lic (wedge) come with adapters. the maps do not...they have to be tapped.

Also no need to put x2 or x1 UNLESS you want 2 sets. i'm going o assume everyone wants a pair for the doors and lic plates, and map P

I'll PM with an invoice once i get enough people to place the order. pricing is on the first page

 

got the invoice ,payment sent. Can't wait to see how the lic. plate lights look! Do u think they will be shipped at least by the end of the week?

 

i'm going to work on them with the next few days, but like i said its like guess and check when sanding it down. no worries though i'm going to try my hardest to get them out asap

 

no prob take ur time, I was just courious. The lightin in the pics look great , by the way thanx for the extra work ur puttin in on these lic plate boards to make the install easier on us.

 

my pleasure. it wouldn't be an actual product if it did'nt really fit right the first time. but if they dont fit 100% you'll just have to sand a little more. not as much as i'm doing though. haha no wonder metal max stopped making these...haha jk jk at least i dont have to assemble them.

 

Payment has been sent

Oh crap, that doesn't fit on my car. my car is '00 with sunroof. what I'm must suppose to do with it 'cause I'm already made a payment with license plate and map light. If any body asking for that map light, you could just sell it to him/her.

 

Is your car has sunroof or not? if your car non-sunroof, you can buy that map light.

 

Yes mine comes with sunroof, OP just let me know how much more to send.

 

oh no, i have an 02 with sunroof .... it does matter?