CA Eibach Tokico combo
04-13-2011 | 09:36 PM
#3
Oops, sorry, Adjustable Illuminas, the white ones. Mounts are Nissan OEM from dealership. No squeeks rattles or noise. PM me your email, I'll send over some pics. Tomorrow I'll be able to weigh them to get shipping, which I'm guessing will be between $20-50 for that zip.
Dr J
Dr J
04-13-2011 | 11:33 PM
#4
ics: please! wlapinoy@gmail.com
Theyre not for me but for a homie from the LA Chapter of SCM.
04-14-2011 | 11:22 AM
#8
Uploaded with ImageShack.us
Here they are. I'll clean them up before delivery, my greasy mechanix gloves, lol. I dunno how many miles. Less than 60k? I don't know. But I do know the driver drives easy! Tokicos are lifetime warranty anyways, I can't remember anybody ever wearing out their illuminas.
edit: Just noticed one of the boot's short. I'll double check that tonight.
Dr J
04-14-2011 | 07:44 PM
#10
Sprints and struts, plus bearings and mounts. All completely assembled and ready to go. Good condition. If you have basic tools and about 4 hours, you can get these swapped and enjoy improved handling. For the fronts, 3 bolts up top, 2 down low. It's that easy. The rears require removing the trunk felt liner, but it's just as easy once you get that out of the way.
Again, these are pre-assembled and ready to install. You don't need spring compressors, just have some basic tools and a couple hours.
$400 obo, paypal to my screenname at yahoo
edit: To clarify: Eibach sprints, Tokico Illumina adjustable struts, Nissan OEM dealership strut mounts, Nissan OEM dealership bearings.
Dr J
Again, these are pre-assembled and ready to install. You don't need spring compressors, just have some basic tools and a couple hours.
$400 obo, paypal to my screenname at yahoo
edit: To clarify: Eibach sprints, Tokico Illumina adjustable struts, Nissan OEM dealership strut mounts, Nissan OEM dealership bearings.
Dr J
B4A1V5
04-15-2011 | 12:23 AM
#11
Sorry, I dunno metric, but will convert if necessary!
Front drop: 1.3in
Rear drop: 1.0in
Gives aggressive stance, but not so low that you gotta take driveways at ridiculous angles. Yeah it'll fit your 2000 SE without camber kit. It was taken off my customer's 2000 SE, so yeah, for sure it'll fit.
I think factory spec is -1deg camber, and this setup will put you at least -0.5. Still within spec. The customer's car didn't have abnormal tire wear.
Will ship to Canada. Today I ended up changing struts in my own car, but I'll get you shipping quote tomorrow.
Dr J
Front drop: 1.3in
Rear drop: 1.0in
Gives aggressive stance, but not so low that you gotta take driveways at ridiculous angles. Yeah it'll fit your 2000 SE without camber kit. It was taken off my customer's 2000 SE, so yeah, for sure it'll fit.
I think factory spec is -1deg camber, and this setup will put you at least -0.5. Still within spec. The customer's car didn't have abnormal tire wear.Will ship to Canada. Today I ended up changing struts in my own car, but I'll get you shipping quote tomorrow.
Dr J
04-15-2011 | 05:37 PM
#13
160 to canada.
Yeas one of the boots is slightly shorter but just long enough to cover the piston. I inspected the piston and there is no damage. Cosmetically three out of five. Functionally five out of five.
Yeas one of the boots is slightly shorter but just long enough to cover the piston. I inspected the piston and there is no damage. Cosmetically three out of five. Functionally five out of five.
Thread
Thread Starter
Forum
Replies
Last Post
imported_Nismo_max
1st-3rd Generations Classifieds (1981-1994)
4
02-17-2016 03:39 AM
MaxLvr21
5th Generation Maxima (2000-2003)
14
10-17-2015 12:11 PM
Stagnet04
4th Generation Classifieds (1995-1999)
2
10-11-2015 08:16 PM