I'm looking for a OEM intake for 2002 maxima. Objective is to get rid of my cheap eBay intake that came with the car When I got it from a buddy and get the stillen short ram.

 

Are you looking for the full setup?

 

Not necessarily. Since I have the MAF and getting the stillen filter I just need the accordion piece that comes off the throttle and the big piece that attaches to that. ( not sure what it's called but i believe it's water bypass and sound deadening) the bottom line and the reason I'm doing this is two things. I like the stillen one better and With the current intake I have one main vacuum line isnt connected! No good!

 

Oh, never mind. I have everything after the MAF.
I'm sure someone on here has these pieces lying around their garage.
I still don't get why you want to stock setup when you emphasize that you are interested in the stillen intake...

 

I want this setup and kit:
http://www.google.com/imgres?q=2002+...9&tx=159&ty=83


http://thmotorsports.com/i-288100.as...ingSeanVehSpec

 

I love my Stillen Velocity stack/ bellmouth. It's aluminum and pretty. However, an oiled filter on these cars is a BIG no-no!!

Get a bellmouth off eBay, one with a 6" opening and 3" outlet. Then, get an AEM dryflow filter off eBay, then your done! Well, you'll need to get a MAF adaptor.

I am getting rid of my Stillen oiled filter for a dryflow.... Keeping my aluminum Stillen bellmouth. Picked up a AEM filter to fit it for $48 shipped.

Here is a decent bellmouth alternative.
http://www.bloxracing.com/bloxshop/i...product_id=208

 

Again, check eBay, you can get bellmouths much cheaper, just wanted to give an example. The extra 2-3" you may gain in length will have no noticeable impact on performance over the Stillen.