TX TX FS: 2002 Infiniti I35 Part Out - Gold/Beidge
12-06-2012 | 03:23 PM
#48
12-07-2012 | 07:34 PM
#50
12-27-2012 | 11:18 AM
#65
Prices are not with shipping
CM headers/y-pipe (cheap, crap, gets the job done) - 50
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generat...ictures-2.html - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generat...ictures-2.html - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
12-27-2012 | 03:10 PM
#69
12-28-2012 | 05:05 AM
#72
Junior Member
Joined: Jun 2010
Posts: 76
From: SC
CM headers/y-pipe (cheap, crap, gets the job done) - 50
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generat...ictures-2.html - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
test pipe 3" - 50
ES torque mounts (1 installed on car, 1 in hand never installed) - 60
tranny cooler
stock exhaust (resonator removed) - 75
o2 sim - 15
taillights - 100
radio (with aux input mod) - 75
a/c climate control - 25
seats (driver seat has coupe tears) all 4 - 200
manifold+elbow+throttle body - 150
maf sensor (2001 maxima maf with AIT sensor swapped over) http://forums.maxima.org/5th-generat...ictures-2.html - 50
cam position sensors - both - 50
any other sensors - $
door sills - 50
pillars - 50
window switches - all 4 - 150
door handles - inside - all 4 - 75
door panels - all 4 - 150
side mirrors - 100
fuel rails+injectors - 100
coil packs - 50
clock - 20
airbags with module - 200
ecu - 100
glove box - 25
side skirts - passenger side damanged - pictures in thread - 75
engine (spun bearing or rod knock; not sure. ran WOT on really low oil and engine started making noise) - $
transmission (shifts fine in low rpm's; in high rpm's it will shift fine with DR Mod or maybe a shift kit) - 200
these prices are picked up. if you want it shipped it will be extra. i will not be shipping out big/heavy parts.
there are a lot of PM's and posts I haven't replied to but i will get to all of you. just been really busy
Thread
Thread Starter
Forum
Replies
Last Post
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM