HELP. Tools Needed to change Manual Fluid on 2k2???
#3
Re: HELP. Tools Needed to change Manual Fluid on 2k2???
#4
Re: Re: HELP. Tools Needed to change Manual Fluid on 2k2???
Originally posted by jjames
I guess after being a smarta$$, I could be helpful.
http://boostedmaximas.com/howto/trannymt90.html
I guess after being a smarta$$, I could be helpful.
http://boostedmaximas.com/howto/trannymt90.html
#5
Re: Re: Re: HELP. Tools Needed to change Manual Fluid on 2k2???
Originally posted by Kojiro_FtT
The limk you gave wa for the 3.0L ehgine. I thought i said 2k2!!
Bro put the bomng down
2k2
Anyhoo, I put da stuff in REDLINE MT-90. fIRST i RUN TO pEPBOYS TO GET A 10mm SOCKET
#6
Re: Re: Re: HELP. Tools Needed to change Manual Fluid on 2k2???
Originally posted by Kojiro_FtT
The limk you gave wa for the 3.0L ehgine. I thought i said 2k2!!
Bro put the bomng down
2k2
Anyhoo, I put da stuff in REDLINE MT-90. fIRST i RUN TO pEPBOYS TO GET A 10mm SOCKET. I drove there in my 91 SE-R and fell in love all over again. Drain & Fill = Smooth, there is no more notchiness. Anyway, I go to my bro's pad to play GTAIII - 4 hrs later I'm heading home - This thing is shifting much more fluidly now -- it's a convingcing kind of shift - saying - I'm in there dude1
2k2 6- Speed
MT-90 "It's Good Stuff _ BudLongs"
#7
Oh yaah. On the way home I pull up to a light and there is this Toyota Avalon there with these 2 duded with their Limp NBizkit hats on . They r playing dome rap like DmX and I pull up...creeping. THey act like they r Staging for a 1/4,,, I'm like WTF, but i thought. hhhmmmmmmmmmmmmmmm. NOw would be a good time to test the RedLIne MT-90... So I go. Spin a little, but grabs quickly... 6200 rpm SLAM - GOES IN = chIRPS = BLAST TO 65OO SMACK - LIKE A FAST BALL70 BY THIS TIME I SLOW . tHESE GUYS were still in Kansas
#9
Re: Re: Re: Re: HELP. Tools Needed to change Manual Fluid on 2k2???
You are still the dumba$$.
I thought I sent the link for a 2k2. Btw, you're welcome.
Ungrateful little fu.........
I thought I sent the link for a 2k2. Btw, you're welcome.
Ungrateful little fu.........
Originally posted by ABQMAX
Dude who is the dumba$$ now!!!
The limk you gave wa for the 3.0L ehgine. I thought i said 2k2!!
Bro put the bomng down
2k2
Anyhoo, I put da stuff in REDLINE MT-90. fIRST i RUN TO pEPBOYS TO GET A 10mm SOCKET
Dude who is the dumba$$ now!!!
The limk you gave wa for the 3.0L ehgine. I thought i said 2k2!!
Bro put the bomng down
2k2
Anyhoo, I put da stuff in REDLINE MT-90. fIRST i RUN TO pEPBOYS TO GET A 10mm SOCKET
#10
Re: Re: HELP. Tools Needed to change Manual Fluid on 2k2???
Originally posted by jjames
I guess after being a smarta$$, I could be helpful.
http://boostedmaximas.com/howto/trannymt90.html
I guess after being a smarta$$, I could be helpful.
http://boostedmaximas.com/howto/trannymt90.html
This link is for 5 speed - not 6 speed. 2 totaly different transmissions.
10mm allen for 2k2
PAY ATTENTION NEXT TIME
Thread
Thread Starter
Forum
Replies
Last Post
TonyJr
3rd Generation Maxima (1989-1994)
4
08-20-2015 12:14 AM
RealityCheck
4th Generation Maxima (1995-1999)
2
08-05-2015 06:18 AM