turn signals out?
#1
turn signals out?
aiite i went out for dinner tonight and when i was coming back, i noticed that my headlights were on obviously, but my signals were not..both sides...however, when i would signal, they would light up...if it was just one side i would assume that the bulb was bad, but this is both sides...anybody have any ideas?
#3
Originally posted by Y2KSESteve
Sounds like the stealth signal mod unintentionally.
Sounds like the stealth signal mod unintentionally.
#4
I've had this happen before. It's probably just a fuse. The parking lights are controlled by a seperate fuse from the turn signals or the headlights. Check your fuses in the main cabin area to see if one is blown.
#5
Originally posted by studman
I've had this happen before. It's probably just a fuse. The parking lights are controlled by a seperate fuse from the turn signals or the headlights. Check your fuses in the main cabin area to see if one is blown.
I've had this happen before. It's probably just a fuse. The parking lights are controlled by a seperate fuse from the turn signals or the headlights. Check your fuses in the main cabin area to see if one is blown.
#7
Originally posted by MaxedOut2g
stealth signal? sorry i havent heard of that...im not worried about it too much, im juss kinda ****ed cuz its like WTF? why is that happening...im at like 33k miles and i need to get ALL my problems taken care of b4 thanksgiving cuz im gonna be driving home and leaving it there so i need everythign to be 100% b4 that...thanks
stealth signal? sorry i havent heard of that...im not worried about it too much, im juss kinda ****ed cuz its like WTF? why is that happening...im at like 33k miles and i need to get ALL my problems taken care of b4 thanksgiving cuz im gonna be driving home and leaving it there so i need everythign to be 100% b4 that...thanks
Eliminates the AMBER running lamp filament on the 1157 bulb used for a 2K-2K1 headlamp, but still uses the blinker filament. This mod makes the headlamps only produce white light until the blinker is activated, which looks better in my opinion especially with clear front corners.
STEALTH Running Lamps(FREE Mod)
1)Remove the bulb/socket from the headlamp housing.
2)Remove the bulb from the socket.
3)Place SMALL piece of black electrical tape over ONE "knub"(small contact on bottom of bulb).
4)Reinstall bulb into the socket.
5)Turn on hazards(or blinker with keys in ignition). If it flashes reinstall bulb/socket into the headlamp housing, if not, remove bulb from the socket and move the electrical tape to the other "knub".
Courtesy-IceY2k1
#8
Originally posted by Y2KSESteve
STEALTH Running Lamps(FREE Mod)....
Courtesy-IceY2k1
STEALTH Running Lamps(FREE Mod)....
Courtesy-IceY2k1
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 06:34 PM