last step of basslink install....switched 12v lead?
#1
last step of basslink install....switched 12v lead?
What wire in the jumble of wires going to where the bose sub amp was is 12v switched? I guess I can grab a tester and find which one but asking here is much easier, plus its 97 degrees outside and not much fun to work in.
#2
Ok, I give up. I spliced into the correct color coded wires like it said to in the write up. I disconnected my bose amp and sub and spliced into the connector before it would plug into the amp.
Hook up my power and ground and go to turn the sub on.
NOTHING..
No sound from the sub, nothing from the speakers, nothing at all..
HELP..
Hook up my power and ground and go to turn the sub on.
NOTHING..
No sound from the sub, nothing from the speakers, nothing at all..
HELP..
#3
Originally posted by slag
Ok, I give up. I spliced into the correct color coded wires like it said to in the write up. I disconnected my bose amp and sub and spliced into the connector before it would plug into the amp.
Hook up my power and ground and go to turn the sub on.
NOTHING..
No sound from the sub, nothing from the speakers, nothing at all..
HELP..
Ok, I give up. I spliced into the correct color coded wires like it said to in the write up. I disconnected my bose amp and sub and spliced into the connector before it would plug into the amp.
Hook up my power and ground and go to turn the sub on.
NOTHING..
No sound from the sub, nothing from the speakers, nothing at all..
HELP..
Thread
Thread Starter
Forum
Replies
Last Post
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM