Otto Fstb
07-09-2003, 10:58 AM
#1
Member
Thread Starter
Join Date: Apr 2003
Posts: 74
Otto Fstb
I was wondering what do the mounting brackets look like on the OTTO FSTB for 5th gen.?
I have a 4th gen and I ordered a FSTB (ebay) but I think I recieved the really nice 5th gen bar. Its the polished solid machined aluminum bar. It looks really really nice.
Anyway I ordered it from procarparts and they admitted to sending me the wrong part. So they are shipping the correct one. The good news is that they told me to just keep the one they sent me and sell it on Ebay or something. Before I sell it I want to make sure that it has the correct brackets for a 5th gen.
This bar is brand new and retails for $57 + shipping. Any offers?
I have a 4th gen and I ordered a FSTB (ebay) but I think I recieved the really nice 5th gen bar. Its the polished solid machined aluminum bar. It looks really really nice.
Anyway I ordered it from procarparts and they admitted to sending me the wrong part. So they are shipping the correct one. The good news is that they told me to just keep the one they sent me and sell it on Ebay or something. Before I sell it I want to make sure that it has the correct brackets for a 5th gen.
This bar is brand new and retails for $57 + shipping. Any offers?
07-09-2003, 11:40 AM
#4
Senior Member
Join Date: Apr 2002
Posts: 702
Re: Otto Fstb
I'll give you $25 for it.
Originally posted by maxnomo
I was wondering what do the mounting brackets look like on the OTTO FSTB for 5th gen.?
I have a 4th gen and I ordered a FSTB (ebay) but I think I recieved the really nice 5th gen bar. Its the polished solid machined aluminum bar. It looks really really nice.
Anyway I ordered it from procarparts and they admitted to sending me the wrong part. So they are shipping the correct one. The good news is that they told me to just keep the one they sent me and sell it on Ebay or something. Before I sell it I want to make sure that it has the correct brackets for a 5th gen.
This bar is brand new and retails for $57 + shipping. Any offers?
I was wondering what do the mounting brackets look like on the OTTO FSTB for 5th gen.?
I have a 4th gen and I ordered a FSTB (ebay) but I think I recieved the really nice 5th gen bar. Its the polished solid machined aluminum bar. It looks really really nice.
Anyway I ordered it from procarparts and they admitted to sending me the wrong part. So they are shipping the correct one. The good news is that they told me to just keep the one they sent me and sell it on Ebay or something. Before I sell it I want to make sure that it has the correct brackets for a 5th gen.
This bar is brand new and retails for $57 + shipping. Any offers?
07-09-2003, 12:33 PM
#7
Donating Maxima.org Member
Join Date: Apr 2003
Posts: 187
Originally posted by maxnomo
Thats the bar. Im really impressed with the quality of it for the price.
How many holes does the bracket have? I might be asking too much here, but does anyone know the inner diameter of the bracket?
Thats the bar. Im really impressed with the quality of it for the price.
How many holes does the bracket have? I might be asking too much here, but does anyone know the inner diameter of the bracket?
K
07-09-2003, 02:21 PM
#13
Member
Thread Starter
Join Date: Apr 2003
Posts: 74
Well I looked at the brackets they are different then the ones posted above. They are completely circular not oblonged like above. They also only have two bolt holes. The box it came in says MZR not M4F. Im going to call them and figure which car these belong to.
07-09-2003, 02:36 PM
#15
Member
Thread Starter
Join Date: Apr 2003
Posts: 74
Well I wont lose any sleep I got it for free. I just want to make sure that if I do sell it to someone that it is the correct part.
I just got off the phone with procarparts and the guy told me that it is for a 2000-2003 maxima. Im not convinced cause of the differences I described above.
The brackets look alot like these:
http://www.procarparts.com/store/dis...ALXX-RRXX-STBX
But they are aluminized (or whatever) like the ones above. Plus the bar mount is offset just like ones above not centered as shown in the link. Only two bolt holes though.
The bar itself is identicle to the one above as far as I can tell. And I cant find any bars on procarparts.com that look like the 5th gen bar.
Anybody know the correct inner diameter of the bracket? The id is too small to fit around the stut mount on my 4th gen.
I just got off the phone with procarparts and the guy told me that it is for a 2000-2003 maxima. Im not convinced cause of the differences I described above.
The brackets look alot like these:
http://www.procarparts.com/store/dis...ALXX-RRXX-STBX
But they are aluminized (or whatever) like the ones above. Plus the bar mount is offset just like ones above not centered as shown in the link. Only two bolt holes though.
The bar itself is identicle to the one above as far as I can tell. And I cant find any bars on procarparts.com that look like the 5th gen bar.
Anybody know the correct inner diameter of the bracket? The id is too small to fit around the stut mount on my 4th gen.
07-09-2003, 02:47 PM
#16
Member
Thread Starter
Join Date: Apr 2003
Posts: 74
Found it. Its for 90-96 300Z. Heres the link:
http://www.procarparts.com/store/dis...OTRG-NTRR-RTBX
Do you still want it for $35? Whats the best Z forum?
http://www.procarparts.com/store/dis...OTRG-NTRR-RTBX
Do you still want it for $35? Whats the best Z forum?
07-10-2003, 05:23 AM
#17
Donating Maxima.org Member
Join Date: Apr 2003
Posts: 187
Originally posted by maxnomo
Found it. Its for 90-96 300Z. Heres the link:
http://www.procarparts.com/store/dis...OTRG-NTRR-RTBX
Do you still want it for $35? Whats the best Z forum?
Found it. Its for 90-96 300Z. Heres the link:
http://www.procarparts.com/store/dis...OTRG-NTRR-RTBX
Do you still want it for $35? Whats the best Z forum?
I have an '03 Maxima.
Thread
Thread Starter
Forum
Replies
Last Post
Nismo87SE
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
2
11-01-2000 06:11 PM