3.5 owners---Rejoice...Stillen Headers are out!
08-13-2003, 11:44 AM
#1
3.5 owners---Rejoice...Stillen Headers are out!
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
You must call us to get in on this!!!!!
08-13-2003, 11:48 AM
#2
Guest
Posts: n/a
Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by Y2KSESteve
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
Dyno - install - dyno (same day, same settings, same dyno) $840 with no "third party" dynos is a lil crazy. The minimal amount for the dyno charges will be worth its weight in platinum if these put down good numbers.
$900 is a lot for something with no proven numbers.
08-13-2003, 11:53 AM
#4
Wow, and I just posted something makin a comment about how the headers will probly never be available. This is exciting, especially if they put down some good numbers! I think I just picked out my Christmas present 
$840 is up there, but hopefully it'll prove to be worth it.
What kind of work will be involved in the installation??? I've looked for a way to slip the manifold out, but cant figure a way without pulling some stuff out of the engine bay. Any ideas???
$840 is up there, but hopefully it'll prove to be worth it.What kind of work will be involved in the installation??? I've looked for a way to slip the manifold out, but cant figure a way without pulling some stuff out of the engine bay. Any ideas???
with no dynos yippie SIGH.......
08-13-2003, 12:02 PM
#6
All the preliminary dyno testing that has been done on these headers has shown a 25-30 hp gain at the wheels.
http://store.yahoo.com/southwestauto...rneconima.html
http://store.yahoo.com/southwestauto...rneconima.html
08-13-2003, 12:04 PM
#7
Originally posted by Y2KSESteve
All the preliminary dyno testing that has been done on these headers has shown a 25-30 hp gain at the wheels.
http://store.yahoo.com/southwestauto...rneconima.html
All the preliminary dyno testing that has been done on these headers has shown a 25-30 hp gain at the wheels.
http://store.yahoo.com/southwestauto...rneconima.html
08-13-2003, 12:07 PM
#8
Guys....guys.
This is an opportunity to be a PIONEER! First, to have them installed and dyno wins the .orgY brownie points. We do NOT have Honduuuuhs, so don't expect dynos with everything you buy. You guys don't have many power adder choices, so you'll eventually have to buy them once you buy everything else. Nobody, except HS will probably ever make these, so you're screwed.
Stillen DOES NOT MAKE CRAP! Buy it and you will have gains, but is it worth the $tealin price...if you have to ask, it's probably not worth it to you.
I'm betting <5hp, if it's just shorty headers on a NA car.
MY QUESTIONS:
1)Are these shorty headers or does it include the Y-pipe?
2)Why in the hell don't these also fit a VQ30?
3)What about the 2K2+ AERO lip?
4)Why is Steve so
?
This is an opportunity to be a PIONEER! First, to have them installed and dyno wins the .orgY brownie points. We do NOT have Honduuuuhs, so don't expect dynos with everything you buy. You guys don't have many power adder choices, so you'll eventually have to buy them once you buy everything else. Nobody, except HS will probably ever make these, so you're screwed.
Stillen DOES NOT MAKE CRAP! Buy it and you will have gains, but is it worth the $tealin price...if you have to ask, it's probably not worth it to you.
I'm betting <5hp, if it's just shorty headers on a NA car.
MY QUESTIONS:
1)Are these shorty headers or does it include the Y-pipe?
2)Why in the hell don't these also fit a VQ30?
3)What about the 2K2+ AERO lip?
4)Why is Steve so
?
08-13-2003, 12:10 PM
#11
betting less than 5 hp? that seems kinda low... seem to recall NA spec V's gaining over 10 hp to the wheels with the installation of HS headers, but then again it is a different engine. I won't be handin out my $900 before dyno's, but its nice to know there is another performance part available
08-13-2003, 12:11 PM
#13
Originally posted by IceY2K1
MY QUESTIONS:
1)Are these shorty headers or does it include the Y-pipe?
2)Why in the hell don't these also fit a VQ30?
3)What about the 2K2+ AERO lip?
4)Why is Steve so?
MY QUESTIONS:
1)Are these shorty headers or does it include the Y-pipe?
2)Why in the hell don't these also fit a VQ30?
3)What about the 2K2+ AERO lip?
4)Why is Steve so
?
2)VQ30 sucks
3)who knows Stillen thinks the fish gills would be a better seller
4)
08-13-2003, 12:12 PM
#14
Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by Y2KSESteve
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
Kevin
08-13-2003, 12:15 PM
#16
1. These headers do include the Y-pipe, see link I posted above.
2. These are only for the VQ35.
3. Still no word on the aero lip
4.
Edit: These headers will put out much more than a 5 hp gain.
2. These are only for the VQ35.
3. Still no word on the aero lip
4.
Edit: These headers will put out much more than a 5 hp gain.
08-13-2003, 12:20 PM
#22
Originally posted by Y2KSESteve
1. These headers do include the Y-pipe, see link I posted above.
2. These are only for the VQ35.
3. Still no word on the aero lip
4.
Edit: These headers will put out much more than a 5 hp gain.
1. These headers do include the Y-pipe, see link I posted above.
2. These are only for the VQ35.
3. Still no word on the aero lip
4.
Edit: These headers will put out much more than a 5 hp gain.
2)Should fit the same on the VQ30.
3)
4)
08-13-2003, 12:23 PM
#24
Originally posted by IceY2K1
1)You posted while I was writing.
2)Should fit the same on the VQ30.
3)
4)
1)You posted while I was writing.
2)Should fit the same on the VQ30.
3)
4)
1)
2) You would think so but the person that knows this best is Emax and he says no way.
3)
4)
08-13-2003, 12:24 PM
#25
Originally posted by bigdo26
betting less than 5 hp? that seems kinda low... seem to recall NA spec V's gaining over 10 hp to the wheels with the installation of HS headers, but then again it is a different engine. I won't be handin out my $900 before dyno's, but its nice to know there is another performance part available
betting less than 5 hp? that seems kinda low... seem to recall NA spec V's gaining over 10 hp to the wheels with the installation of HS headers, but then again it is a different engine. I won't be handin out my $900 before dyno's, but its nice to know there is another performance part available
Now that I've seen that it's a long-tube header that APPEARS to be equal length runners, I'd GUESS 15-17whp max NA.
08-13-2003, 12:27 PM
#27
Originally posted by SR20DEN
1)
2) You would think so but the person that knows this best is Emax and he says no way.
3)
4)
1)
2) You would think so but the person that knows this best is Emax and he says no way.
3)
4)
The cat would probably need tweaking, but shouldn't be too far off, right?
08-13-2003, 12:33 PM
#29
Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by Y2KSESteve
They will begin shipping in exactly fourteen days!!!!!
They will begin shipping in exactly fourteen days!!!!!
Gee... we have not heard "2 weeks" before.
Keep us posted none the less.
08-13-2003, 12:38 PM
#31
Guest
Posts: n/a
I have a couple questions for you guys:
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
08-13-2003, 12:39 PM
#32
Re: Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by SR20DEN
14 days = 2 weeks.
Gee... we have not heard "2 weeks" before.
Keep us posted none the less.
14 days = 2 weeks.
Gee... we have not heard "2 weeks" before.
Keep us posted none the less.
08-13-2003, 12:40 PM
#33
Originally posted by BiggD23
I have a couple questions for you guys:
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
I have a couple questions for you guys:
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
08-13-2003, 12:41 PM
#35
Originally posted by BiggD23
I have a couple questions for you guys:
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
I have a couple questions for you guys:
1) Is this a worthwhile mod for automatics or is it meant more for manuals? The reason I ask is that GoldMember said, "The only problem is that i'm an auto."
2) Aside from the $840 for the parts themselves, what would I be looking at to have them installed? Ballpark figure.
Thanks.
2)Few hundred AT LEAST.
08-13-2003, 12:43 PM
#36
Senior Member
Join Date: Mar 2002
Posts: 243
Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by Y2KSESteve
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
The Stillen headers for the 3.5 Maximas are now available for pre-order thru us here!!!! You can pre-order yours for $840 including shipping to anywhere in the world (yup, even our friends in Canada)!!!!!!! They will begin shipping in exactly fourteen days!!!!!
You must call us to get in on this!!!!!
08-13-2003, 12:45 PM
#37
Senior Member
Join Date: Apr 2002
Posts: 702
Re: Re: 3.5 owners---Rejoice...Stillen Headers are out!
Originally posted by 6SPD_HLSD
Based on the pictures on your site, there are no pre-cats in the headers but there are holes for the O2 sensors. How will the SES light be taken care of when the ECU sees no precats?
Based on the pictures on your site, there are no pre-cats in the headers but there are holes for the O2 sensors. How will the SES light be taken care of when the ECU sees no precats?
