5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Need help removing radio..Qucik!!!

Thread Tools
 
Search this Thread
 
Old 08-23-2003 | 02:25 PM
  #1  
Prodigy's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 343
Need help removing radio..Qucik!!!

I'm trying to get the radio out but I cant find what's holding it on. I have 2 screws at the bottom removed but I cant find a way to get the top undone (under the center vents). Do they need to be removed or what?. If you know please help, my interior is in pieces and I still cant get this undone!!! Thanks in advance
Old 08-23-2003 | 02:28 PM
  #2  
asu174's Avatar
Clay Aiken has fancy genitals
iTrader: (11)
 
Joined: May 2002
Posts: 6,087
Pull out the center vents. I generally prey from the sides, but be VERY careful not to screw up your dash.
Old 08-23-2003 | 02:31 PM
  #3  
Prodigy's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 343
So they are just clipped in?
Old 08-23-2003 | 02:48 PM
  #4  
Max2000SE's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2003
Posts: 328
From: Mantua, NJ
Yes the vents are just clipped in...They way I did it was try to pry it in an upward motion...Dont pull it directly out, it wont budge...Just be careful and pull the vent upwards and you should be safe..Then under there you will see the remaining 2 screws you need to remove to get your unit out....Good luck
Old 08-23-2003 | 05:55 PM
  #5  
KCMichaelM's Avatar
Donating Maxima.org Member
 
Joined: Jul 2003
Posts: 188
Originally posted by Max2000SE
Yes the vents are just clipped in...They way I did it was try to pry it in an upward motion...Dont pull it directly out, it wont budge...Just be careful and pull the vent upwards and you should be safe..Then under there you will see the remaining 2 screws you need to remove to get your unit out....Good luck

Exactly right, and it's much more difficult than you think
Old 08-24-2003 | 01:10 PM
  #6  
jonbth's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 219
I used a pick tool and inserted it thru the vent and gently pryed the clip inward. I needed a pen-light to see where to pry. It's very hard the first time but easy after that.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
my03maxima
7th Generation Maxima (2009-2015)
9
07-28-2024 08:40 AM
doctorpullit
8th Generation Maxima (2016-)
25
03-29-2016 12:08 PM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 07:34 PM
jaydot901
7th Generation Maxima (2009-2015)
9
09-29-2015 02:18 PM
Max Nu-BE
5th Generation Maxima (2000-2003)
2
09-28-2015 11:25 AM




All times are GMT -7. The time now is 07:28 AM.