SSR Engineering 3.5 Turbo Kit
#81
Originally Posted by blubyu2k2
hmm come pick up my car and trailor it too cali and you got a project car...If only this could happen ![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#89
Originally Posted by woreyah
I think those numbers may be a little decieving. Porsche GT2's have 460hp and pull 11 seconds flat but weigh about 400lbs less than a Maxima. Realistically, I'm thinking mid to high 12s.
Finally we're going to be a force to reckon with.
Finally we're going to be a force to reckon with.
The weight I entered in for the sim was at 3500lbs (wanted it keep it as close to actual weight with driver as possible)
The way I tweaked the turbo, it starts to boost at 2000, and is a full boost at 2500 torque stays over 400 from 2500-6000 so its pretty flat, but a huge amount of torque non the less. Pulls 1.83 60ft on the sim so with slicks the auto will run an ET definetly in the mid-low 12s, that is IF the power produced is close to what I came up with on the sim. 22" slicks wont even be needed with that much power, stock height (25.9) finishes the 1/4 at almost 6200rpms in 3rd.
Im just sharing what I got on the sim, and what to expect if the real #s match the #'s I got. If blubyu2k2 got at 13.6 with a basically bolt on setup and slicks, think about what # that car would run with 150 more whp? Just a thought
![got me](https://maxima.org/forums/images/smilies/ne_nau.gif)
#90
Originally Posted by HitManSE
Im in no way trying to compare the max to a GT2, just for the record the 02 and 04 GT2 runs a 12flat. Slap on a pair of slicks to the GT2 and you'll be surprized at how quick it runs! The mph will be slightly lower but the ET will be improved quite a bit.
#98
Originally Posted by pLaTiNumSp3cV
fellas fellas...nobody knows yet. that's why they wanna make a prototype....the first one. so if one of you can pm him or email him....it would be great.
#100
Originally Posted by augie
Whats the cost? I have all my credit card bills cleared. I would be up for it. E-mail me... ![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
#101
Originally Posted by looslip
I think you should ask SSR Engineering. Try emailing SSREngineering@aol.com or Sales@ssr-engineering.com The first page does have a little more detail as to what it may cost. Definately hit them up. Just think about it you'll be the first VQ35DET!
Don't forget to update us on the org if do go through with this tho.
![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
#102
Originally Posted by Altimat
You guys snoozed a bit too long. An Altima 3.5 is going in on the 23rd. http://www.altimas.net/forum/showthr...hreadid=121866
Altimat,
Is it you that's sending in the ECU to Technosquare? I think you guys beat us to that also. Hopefully the ECU flash for the Altima will be usable on the Max.
#104
Originally Posted by 03BlkSETE
Altimat,
Is it you that's sending in the ECU to Technosquare? I think you guys beat us to that also. Hopefully the ECU flash for the Altima will be usable on the Max.
Is it you that's sending in the ECU to Technosquare? I think you guys beat us to that also. Hopefully the ECU flash for the Altima will be usable on the Max.
#105
Originally Posted by Altimat
It is I, but they already had a Max ECU there when mine arrived. I believe they both went to Japan in the same box.
#106
Originally Posted by looslip
I think you should ask SSR Engineering. Try emailing SSREngineering@aol.com or Sales@ssr-engineering.com The first page does have a little more detail as to what it may cost. Definately hit them up. Just think about it you'll be the first VQ35DET!
Don't forget to update us on the org if do go through with this tho.
![ThumbsUp](https://maxima.org/forums/images/smilies/thumbsup.gif)
But you never know!
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#112
Originally Posted by Darth Vader
Altimat, whats getting done to your ecu?
#114
Originally Posted by maximilion
![BS](https://maxima.org/forums/images/smilies/bs.gif)
But, please feel free to prove me wrong.
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
I hate these teaser posts. I see so many where somebody did this or that and "pics to follow" or "timeslip soon" or "dyno to be posted tomorrow". Just wait to post until you have the relevant info to share, please.
#115
well the thing is that my brother took my car to technosquare and his not back yet so i have to wait until around 9pm to test drive my car for my impression and will try to post dyno results on monday the only thing is that they use bosch dyno not dyno jet
#116
Originally Posted by ULISES
well the thing is that my brother took my car to technosquare and his not back yet so i have to wait until around 9pm to test drive my car for my impression and will try to post dyno results on monday the only thing is that they use bosch dyno not dyno jet