im getting the h&r springs
11-15-2003, 09:45 AM
#1
Member
Thread Starter
Join Date: May 2003
Posts: 76
im getting the h&r springs
I plan on getting those h&r springs but I have some questions. First off, are the springs easy enough to install myself and if so what tools/parts would i need. Also although my 02 max is fairly new with 15000 miles I don't plan on getting new shocks for at least 2 years, is that ok? Finally, will I need an alignment? Thanks
11-15-2003, 10:40 AM
#2
You should buy an aftermarket shocks too since the rebouncing rate for these springs are more stiffer than the OEM's, thus the OEM's shocks are poorly designed in the first place and probably will be blown with these springs. I think it's best if you bring it to the professional for installation. You will need to at least check your alignment after a couple days of the installation. Mine was way off and the alignment was needed.
Thread
Thread Starter
Forum
Replies
Last Post
MaxLvr21
5th Generation Maxima (2000-2003)
14
10-17-2015 12:11 PM