New Black Angel Eye Projectors Installed--PICS
04-12-2004, 03:40 PM
#41
Senior Member
Join Date: Dec 2002
Posts: 2,763
Lets home these dumb bastards can read.
Originally Posted by 2MuchMAX4U
Yeah that's what I'm hoping for, just hope I'm the test bunny for the thieves!!!
I was thinking of somehow getting tiny sticker that say...
"ATTN: NON-HID LIGHTING SYSTEM"
Also hoping that the thieves won't think they are HID because they are black and my tails aren't clear, and my wheels aren't like the ones on the other cars that they steal the lights from!
I was thinking of somehow getting tiny sticker that say...
"ATTN: NON-HID LIGHTING SYSTEM"
Also hoping that the thieves won't think they are HID because they are black and my tails aren't clear, and my wheels aren't like the ones on the other cars that they steal the lights from!
04-18-2004, 01:15 PM
#49
Donating Maxima.org Member
Join Date: Sep 2001
Posts: 734
Originally Posted by Trance Artur
I don't really like that. The 2k2 Hid's cleared with DDE lighting look a whole lot better.
thats a good one !
04-24-2004, 12:02 AM
#54
Last night I finally got a chance to install those projectors. Took about 35-40 mins and I had to take out those white clips. I just wanted to get it installed and I didn't have time to wire the angel eyes. I was blown away at the end result! The car looks awesome! Those projectors makes the Anniversary Edition even better! IMHO. I'll post pics sometime in the next few days.
Now for the not so great stuff. The low beam (projector) pattern is funky. It's all over the place. Also, alignment of the beam is a little off. The driver side seems high and the passenger side is a little low. I was wondering if it's possible to adjust the inside of the projector housing? Any other ideas?
Now for the not so great stuff. The low beam (projector) pattern is funky. It's all over the place. Also, alignment of the beam is a little off. The driver side seems high and the passenger side is a little low. I was wondering if it's possible to adjust the inside of the projector housing? Any other ideas?
04-24-2004, 05:42 AM
#55
I agree with you about the beam pattern and I had commented on that before too. It's a little weird when you expect one solid beam and you get a few. I still like them though. As far as alignment issues are concerned I didn't notice any problems there.
05-09-2004, 09:50 PM
#57
Updates
Planning to wire the angel eyes soon. I tried installing aftermarket H3 bulbs and ran into a minor problem. In order to remove the bulb(s) that thin metal piece that holds spring in place must be moved about 1/8 of an inch. I recommend taking pliers and moving it slowly. If you unscrew it, just loosen it a little so that the wire doesn't come off. After all of that, I had to put the original bulbs back in because I didn't realize the Plasma GT-X H3 bulbs produce an insane bright yellow light!!! Planning to get H3s, either the Super Plasma or the Spark Blues. We shall see.
05-10-2004, 07:34 AM
#58
Supporting Maxima.org Member
Join Date: Jan 2004
Location: Bay Area CA
Posts: 213
Originally Posted by 808MAX-SPEC
Planning to wire the angel eyes soon. I tried installing aftermarket H3 bulbs and ran into a minor problem. In order to remove the bulb(s) that thin metal piece that holds spring in place must be moved about 1/8 of an inch. I recommend taking pliers and moving it slowly. If you unscrew it, just loosen it a little so that the wire doesn't come off. After all of that, I had to put the original bulbs back in because I didn't realize the Plasma GT-X H3 bulbs produce an insane bright yellow light!!! Planning to get H3s, either the Super Plasma or the Spark Blues. We shall see.
05-27-2004, 02:00 AM
#59
I promised I would post these pics once I organized my cardomain site.
In my previous post, this metal piece which secures the spring prevents you from removing the H3 bulb.
You can unscrew it or use pliers to move it a least 1/8 of an inch in the direction of the arrow so that the bulb will clear the metal piece.
I'm gonna see if I can work on the angel eyes this weekend and also make a decision whether to get the Spark Blues or the Super Plasmas.
In my previous post, this metal piece which secures the spring prevents you from removing the H3 bulb.
You can unscrew it or use pliers to move it a least 1/8 of an inch in the direction of the arrow so that the bulb will clear the metal piece.
I'm gonna see if I can work on the angel eyes this weekend and also make a decision whether to get the Spark Blues or the Super Plasmas.
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM