Can any1 tell me HOW to remove my front bumper on a 2K1??
#1
Can any1 tell me HOW to remove my front bumper on a 2K1??
I checked the How-To threads and also the FAQ's I didn't see anything that specifically or indirectly dealt with the removal of the front bumper.
I'd like to remove my factory fogs and replace them with after market angel eye fogs.
I didn't know where to begin, any help would be greatly appreciated.
Thanks for your patience.
I'd like to remove my factory fogs and replace them with after market angel eye fogs.
I didn't know where to begin, any help would be greatly appreciated.
Thanks for your patience.
#2
Originally Posted by 96/01 Max
I checked the How-To threads and also the FAQ's I didn't see anything that specifically or indirectly dealt with the removal of the front bumper.
I'd like to remove my factory fogs and replace them with after market angel eye fogs.
I didn't know where to begin, any help would be greatly appreciated.
Thanks for your patience.
I'd like to remove my factory fogs and replace them with after market angel eye fogs.
I didn't know where to begin, any help would be greatly appreciated.
Thanks for your patience.
remove all clips under bumper, this is what holds the splash shields to the bumper.
there are also 2 screws at the ends of each side, above the sidemarker. 1 at the VERY edge and antoher 6" away. remove those 4.
next there should be like 4 or 6 clips holding the top of the grill area to the cars frame. remove those. should come off easily. took me half hour to swap bumpers.
#3
Originally Posted by PoLo
not hard at all...if it's anything like my 2k2 removal.
remove all clips under bumper, this is what holds the splash shields to the bumper.
there are also 2 screws at the ends of each side, above the sidemarker. 1 at the VERY edge and antoher 6" away. remove those 4.
next there should be like 4 or 6 clips holding the top of the grill area to the cars frame. remove those. should come off easily. took me half hour to swap bumpers.
remove all clips under bumper, this is what holds the splash shields to the bumper.
there are also 2 screws at the ends of each side, above the sidemarker. 1 at the VERY edge and antoher 6" away. remove those 4.
next there should be like 4 or 6 clips holding the top of the grill area to the cars frame. remove those. should come off easily. took me half hour to swap bumpers.
Is there any special way to remove the clips? I always find a way to break those things.
#4
Originally Posted by 96/01 Max
I'll try that..thanks for the tip.
Is there any special way to remove the clips? I always find a way to break those things.
Is there any special way to remove the clips? I always find a way to break those things.
the clips on top i believe you just pop out. or they may be like the bottom ones, which you just unscrew about 1/2 turn until you see the clip pop out a bit, after that just pull on it or get a screw driver and lift it up. believe me, it's rather easy.
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
Max139617
5th Generation Classifieds (2000-2003)
2
08-29-2015 02:55 PM
MAXSE5SPD
Other For Sale/Wanted
2
08-23-2015 12:06 PM
jomax14
7th Generation Maxima (2009-2015)
12
08-12-2015 11:49 AM