Well went to Radio shack and picked up a handful of LED bulbs.

I am going to do the doors

But one question.
Anyone know how to get the one for the security system?
The one next to the clock.
How the heck do you take that one off?

Give me some feedback

Pics will come as soon as i start this mod

 

Hehehe... good luck with the door LED's.

 

break it off!! j/p
james

 

are these the LED's in the step lights?? or the ones that go in the controls for the windows?? just wonderin' good luck!!

 

He's talking about the ones under the window controls.

 

kewl...I would love to see those...

 

you mean removing the clock thing? if that's what you're talking about, all you have to do is pull directly up on the clock.

if you're talking about the LED itself, i don't think it's too difficult. unplug all the wire harnesses and i think you can just pull it out with not too much force. b/c the RadioShOck LEDs are larger than your stockies, you will definitely have to drill so that the bulb sits snug in the hole (i had to do this with my aftermarket dealer alarm). remember to solder or at least Butt-Connect the wire with the LED. i suggest soldering, but that's a pain in the butt in that tight spot, let alone the amount of lead and rosin you'll be inhaling. hope that's somewhat helpful. let me know...

wow... redoing the LEDs, eh? i've been wanting to, but the LEDs are crazy BUCKS and i'm not sure if its quite worth it just yet. i was gonna go Hyperwhite. heheh...

 

Thanks for the info
Yea I will post pics and such after i'm done

 

im almost finished with my blue leds for the temperature control.. ill post those if anyone is interested

anyone know if there are any blue leds for the door buttons on the driver side? they are 4pin surface mounts.. i cant find any blue ones.. all i found were red and green..

didnt get the automatic climate control

 

Definitely intereseted in the pics. A description would also be appreciated. Don't know about the door button leds though.

 

ill post what i have so far when i get home (~7hrs from now)

its pretty simple
-pull out vent
-pull out shift boot area
-unscrew 4 screws to pop out deck
-unscrew one side of the deck to remove temperature controls
-unscrew all the silver screws on temperature controls
-unclip face plate-the slider will pop off
-pop off all the buttons just pull on em and theyll let go
-separate front and back of temperature module
-pull out green board
-desolder leds you dont want
-solder in the ones you want

hmmm... pics will probably help