Yes, we have a few left at the 149.00 price. Next batch of 20 might be priced a bit higher so to everyone that is still kinda hesitant, I would pick one up now and same some money.

Awsome. I have just sent out payment via paypal! thanks again!

heyyyy wats goin onnn maximas r soo pimp

Hey HPautoworks. I was wondering if we were going to have tracking numbers for these so I can sit at a computer all day and hit the refresh to see how much closer it is.

:werd: :Popcorn:

Did you get my payment HPautoworks? and i hate to be a pain, but any idea on when it will ship out & arrive at my door? :) sorry... i am just so eager, and still in absolute awe that this is really happening. :eek:

what is this a picture of?
https://store1.yimg.com/I/hpautoworks_1823_4177023
http://hpautoworks.com/hpaushsh00ma.html

That is the actual STS for the Maxima. The peice is installed under the hood at the tranny, where the cable attaches.

Orders are all shipping out today via priority postal. Whats nice about postal on a small package is that we also gain a day of delivery (saturday).

are you saying i can bi short shifting on my way to da club on saturday night???


schweeeeeeeet

HAHA, it has a mechanism that will prevent shifting when the driver has consumed more than 10 drinks.

hmmm, that part looks intresting to install.... you sure this will not be hard? :hide:

Oh, BTW, thanks for the shipping update!!!! going to get them on saturday!!?!?!? WooooHooo!!!! :woot: :clap:

guess you didn't read my post about it taking, literally, 7 minutes... including the time it took to unscrew the locktite bottle... lol...

HAHA, its harder to get the shifter out of the packaging then to install it.

:spin: :squintdan Man... Finish finals tomorrow and then saturday, it's OVER!

lol... i read it... but i am not understanding where it hooks up. and pic of it installed? i guess i just want to be prepared for when it comes in the mail. But then again, if i can install new shock/spings on my car, then i guess this should be a peice of cake from the sounds of it. but intalled pics would be great! :)

So is this GB still available? :squintdan

Yes it is still open.

Andy...I see which part we are replacing and it looks really really easy, but I was just wondering when you were going to get install instructions put up

All shifters were sent out today via postal mail, so keep a close watch at your mailbox. PhxBlue came down today and installed his on his own.....no help from me and it took about 7.21 minutes (haha)......very easy like I said. He will be posting pics of the shifter installed as well as instructions.

difference between yours and twm
 

it looks like TWM performance has made one now..whats the difference between yours and theirs. besides the price.

If you look at the pics closely, you can see that the TWM one looks like it's made thinner (flimsier?)... HP's uses a higher grade of aluminum also

I will never flame another companies product but from the looks of it, it would seem the 2 main factors that will outweigh everything is:

A.Constructed out of aerospace grade 7075-T6 aluminum vs standard 6061-T6 aluminum. No other STS currently has this strong metal.

B. Thinness of their construction. Not sure how well that will hold up over time. Ours is much denser and seems to be a bit stronger.

Does this STS have any kind of warranty???

dood... it's a solid chunk of aluminum with no moving parts.. what kind of warranty are you looking for? :rolling_e

any left
 

are there any left at the 150 price with the blackstuff whatever that is on it i forget..haha..ok thanks

Yeah we have a few left at the maxima.org price. I suggest ordering one asap though. They are going through pretty quick.

I just ordered on the website. I included a referencing the org group deal price of $150 and free shipping. That's my Christmas present!

All taken care of, processed at the 149 price, will leave tomorrow. Enjoy the Xmas present.

Money sent
 

money sent to paypal..thanks for doing this...hope it is nice investment.

Order processed and will be shipped tomorrow. Cars fully modded or none at all will get a great benefit from the STS.

Here are some crappy camera phone pics and instructions. Very easy to do people! This took me 7 minutes to do which included messing up once. I did the install from referencing the instructions that come with it. The only thing that you are removing from your car is a washer, everything else stays there.

Here is the shift cable, metal piece the STS installs on top of, a wrist pin, and a washer.
http://www.rankmyride.com/data//0/b/..._shifter_d.jpg

Remove the wrist pin and the washer.
http://www.rankmyride.com/data//0/b/..._shifter_e.jpg
http://www.rankmyride.com/data//0/b/..._shifter_f.jpg

Remove the shifter cable from the top of the little post it sits on.
http://www.rankmyride.com/data//0/b/..._shifter_g.jpg

Take the shifter into your hand. ( in this pic you are looking at the bottom of the STS )
http://www.rankmyride.com/data//0/b/..._shifter_h.jpg

Turn the STS over and put the post from the original metal piece into the hole on the STS and the lil post on the STS you put the shift cable on.
http://www.rankmyride.com/data//0/b/..._shifter_i.jpg
http://www.rankmyride.com/data//0/b/..._shifter_k.jpg

Then you position the tail end of the STS that has the lil bolt sticking out of it over the notched area on the original metal piece and then push the STS down into place.
http://www.rankmyride.com/data//0/b/..._shifter_l.jpg

You then put the wrist pin back into place. You are not reusing the washer...
http://www.rankmyride.com/data//0/b/..._shifter_b.jpg

You then tighten down the lil bolt on the tail end of the STS with some locktite and a 10mm socket, DO NOT over tighten.
http://www.rankmyride.com/data//0/b/..._shifter_c.jpg

This is how it should look when you are done.
http://www.rankmyride.com/data//0/b/...rt_shifter.jpg

Here is before and after for comparison.
http://www.rankmyride.com/data//0/b/..._shifter_d.jpg
http://www.rankmyride.com/data//0/b/...rt_shifter.jpg


You are now pretty much done. This is very easy to do! I drove all over the place with it today. It is a very nice product, I am very pleased.

Paypal send!Thanx for making this for the Maxima community. :cool:

George, thanks for posting the pics and instructions. And to everyone on this board, thank you once again for trusting our company.

sweet... it looks very simple. i guess i was overthinking what steps had to be done for the install. hahahah. thanks for the pics... maybe i can even tackle this in the rain tomorrow. :)

since this product does not lower the shifter shaft, has anyone cut the shaft to make it lower? maybe i am asking for too much.. :lol:

Cutting the shifter shaft is only more trouble than good. I recommend against it.

:sadpace:

==========