need a New MAF !
#7
I called my local stealership and they said that the last time it was in they found an "airflow meter" that needed to be replaced for $213 including labor (for a 2000 Maxima SE). Is this not the same thing as the MAF?
#8
Originally Posted by Anarchist
I called my local stealership and they said that the last time it was in they found an "airflow meter" that needed to be replaced for $213 including labor (for a 2000 Maxima SE). Is this not the same thing as the MAF?
#11
i just talked to dave this morning about a maf for my 02. $390
for the 00-01 its about $85 and i was told this would work for my 02 but i need to take a temp sensor or something out of my existing maf and put it in the new one so i dont get a ses light on. Im crossing my fingers
for the 00-01 its about $85 and i was told this would work for my 02 but i need to take a temp sensor or something out of my existing maf and put it in the new one so i dont get a ses light on. Im crossing my fingers
#12
Originally Posted by jimmycapp
i just talked to dave this morning about a maf for my 02. $390
for the 00-01 its about $85 and i was told this would work for my 02 but i need to take a temp sensor or something out of my existing maf and put it in the new one so i dont get a ses light on. Im crossing my fingers
for the 00-01 its about $85 and i was told this would work for my 02 but i need to take a temp sensor or something out of my existing maf and put it in the new one so i dont get a ses light on. Im crossing my fingers
#14
I accelerated somewhat hard out of this parking lot then it blew. RPM's dropped and the car eventually cut off not 30 seconds after that. I had to start it 3 times to get it to move. F'ing blows!!
#18
TTZ MAF is killer, almost never ever will you see it go bad. Its not a direct plug n play affair thou, and you need the ECU recalibrated to use it. I have Greddy Emanage for tuning and it allows for diff MAFs to be used. I'm sick of repleacing MAFs, the newest design 22680-2Y001 is going into the car tomorrow for now. I got some nasty hesitation at low RPMs and power has seem to gone down. New coils, plugs, MAF and injector cleaning will be done this week. SeaFoam doesn't do ANYTHING to the car.
#20
Originally Posted by 99 SE-L
Hey guys can you please explain a little more through on the 00-01 MAF'S on the 02's what happens and what is needed for a good fitment/performance thanks
#22
#24
Originally Posted by 99 SE-L
thanks alot Puppet master i will be purchasing a 00 MAF very soon saving me lots and lots of money thanks guys...
#32
Thanks Epacy. It helped. Never done it before. Replaced MAF (part number 22680-2Y001) and the car is running great. It was unable to go beyond 3000 RPM and rough idle when warm (used to die after few seconds in park). Seem to have fixed both problems.
#35
Originally Posted by tisucka
quick question...
Is there a way i can check if my car has the new or old MAF.... if i take it off will there be a part number on it????????????????
thank you
Is there a way i can check if my car has the new or old MAF.... if i take it off will there be a part number on it????????????????
thank you
My MAF is also going to blow very soon, but I was able to get a free one through my dealer under the Nissan extended warranty. I even had my jwt popcharged on and the dealer didn't hesitate
#36
Originally Posted by Nathan
On the outside of the MAF there will be a part number. You'll need a light or you can unbolt it to make it easier for you. Check what number you have and look in the faq's to see if you're is a new or old part number.
My MAF is also going to blow very soon, but I was able to get a free one through my dealer under the Nissan extended warranty. I even had my jwt popcharged on and the dealer didn't hesitate
My MAF is also going to blow very soon, but I was able to get a free one through my dealer under the Nissan extended warranty. I even had my jwt popcharged on and the dealer didn't hesitate
And for the numbers:
Originally Posted by Jime
Yes you can get a 2k1 MAF and transfer the sensor or you can buy the AM600.
However the 2k1 MAF is $80 and the AM600 is approx $400. With the discount the prices are a bit cheaper.
Here is what you can buy and the prices.
For the 2k1 there are 2 MAF's available.
22680AD201 $424.73
226802Y001 $90.11 (This is the one that requires the sensor transferred.)
For the 2k2 there are 2 MAF's available
226806N201 $424.73
22680-AM600 $424.73
For the 2k3 there is 1
22680-AM600 $424.73
However the 2k1 MAF is $80 and the AM600 is approx $400. With the discount the prices are a bit cheaper.
Here is what you can buy and the prices.
For the 2k1 there are 2 MAF's available.
22680AD201 $424.73
226802Y001 $90.11 (This is the one that requires the sensor transferred.)
For the 2k2 there are 2 MAF's available
226806N201 $424.73
22680-AM600 $424.73
For the 2k3 there is 1
22680-AM600 $424.73
http://forums.maxima.org/showthread....ght=thermistor
#38
Finally!! I got the actual product in the shipment. Getting the temp sensor out was kind of a ***** as it was clamped down under the terminals. Anyway, got it installed and the problem is fixed. Got the ECU cleared and no codes came back. Sometimes the car has trouble starting-the few times I started it today-and it dies out after it clicks over. Not sure if that is aftereffect from the bad MAF or what. But car drives great. Will see if the starting problem goes away.
#39
Great. I am wondering if we need the ECU update. The note in the MAF box referred NTSB1-036 TSB. Following is the url for that TSB
http://www.infinitihelp.com/Ownershi.../NTB01-036.htm
I have 2000 A/T california emissions ECU programming part number 23710-2Y173 and it is not listed in the TSB for an update. Would like to know if anyone had this part number and had ECU updated after 22680-2Y001 MAF install. Thanks.
http://www.infinitihelp.com/Ownershi.../NTB01-036.htm
I have 2000 A/T california emissions ECU programming part number 23710-2Y173 and it is not listed in the TSB for an update. Would like to know if anyone had this part number and had ECU updated after 22680-2Y001 MAF install. Thanks.