5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Ignition Light Ring

Thread Tools
 
Search this Thread
 
Old Aug 5, 2005 | 05:51 PM
  #1  
BlackFlux's Avatar
Thread Starter
Member
 
Joined: Jul 2004
Posts: 190
Ignition Light Ring

I have a quick question. After you start your car engine does the ignition light ring go?

Old Aug 5, 2005 | 06:04 PM
  #2  
BewstAdd1ct's Avatar
Supporting Maxima.org Member
 
Joined: Dec 2004
Posts: 1,587
From: Lakeland, FL
ya, mine goes.
Old Aug 5, 2005 | 06:05 PM
  #3  
n3985's Avatar
大陆弟弟
iTrader: (36)
 
Joined: May 2004
Posts: 4,038
From: Edgewater, NJ
Can someone post the DIY to change the color of the ring please?
Old Aug 5, 2005 | 06:07 PM
  #4  
irish44j's Avatar
retired moderator
iTrader: (38)
 
Joined: Oct 2003
Posts: 27,285
From: Burke, VA
It should turn off when you start the car.... but if you've swapped it to an LED, it will stay on a while since LEDs take a while to burn off the power compared to a bulb, which burns it off instantly. My key ring stays lit for about 10 minutes after I turn my alarm on...kind of kewl...


heeeeeeyyyyyy...that pic looks familiar.....like it came off my cardomain site

of course, I'm rolling with the red LED these days - that was the old one where it was a bulb + blue sharpie....
Old Aug 5, 2005 | 06:09 PM
  #5  
irish44j's Avatar
retired moderator
iTrader: (38)
 
Joined: Oct 2003
Posts: 27,285
From: Burke, VA
Originally Posted by n3985
Can someone post the DIY to change the color of the ring please?
here's the writeup I used (this one is blue, I used red)

http://forums.maxima.org/showthread....t=key+ring+LED
Old Aug 5, 2005 | 06:09 PM
  #6  
n3985's Avatar
大陆弟弟
iTrader: (36)
 
Joined: May 2004
Posts: 4,038
From: Edgewater, NJ
So If i was to just paint or sharpie the ring with the stock bulb inside, it will glow whatever color applied to it? No need to swap out bulbs?

*Ha, you posted the link while I was typing this message. Thanks for the link.
Old Aug 5, 2005 | 06:11 PM
  #7  
irish44j's Avatar
retired moderator
iTrader: (38)
 
Joined: Oct 2003
Posts: 27,285
From: Burke, VA
Originally Posted by n3985
So If i was to just paint or sharpie the ring with the stock bulb inside, it will glow whatever color applied to it? No need to swap out bulbs?

*Ha, you posted the link while I was typing this message. Thanks for the link.
it's not as bright if you do the sharpie + bulb. The LED setup is VERY easy to do, and much nicer looking....plus the ring is clear when off, not colored blue like my original setup...
Old Aug 5, 2005 | 07:35 PM
  #8  
BlackFlux's Avatar
Thread Starter
Member
 
Joined: Jul 2004
Posts: 190
irish44j, sorry dude I did hijack that from your cardomain site. The reason why I ask is because I just had an Viper 791XV alarm installed into my car. And I notice that it's not lit when the car is on. However, I could swear that it was always lit before I had that alarm installed.

Ya'll sure it's suppose to cut off?
Old Aug 5, 2005 | 07:39 PM
  #9  
irish44j's Avatar
retired moderator
iTrader: (38)
 
Joined: Oct 2003
Posts: 27,285
From: Burke, VA
yeah, it only lights up so you can see where the key goes when it's dark....pretty sure. I'll try mine out tomorrow night to make sure.
Old Aug 5, 2005 | 08:03 PM
  #10  
BlackFlux's Avatar
Thread Starter
Member
 
Joined: Jul 2004
Posts: 190
aight... that's man.
Old Aug 5, 2005 | 08:15 PM
  #11  
kingofsorrow's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 520
Originally Posted by n3985
So If i was to just paint or sharpie the ring with the stock bulb inside, it will glow whatever color applied to it? No need to swap out bulbs?

*Ha, you posted the link while I was typing this message. Thanks for the link.
i changed the bulb in mine and the look is ssssssssooooooooo cool. i also did the clock in blue LED, but stay away from that because it is a pain in the ***. installing the A33 kit, sidestills and spoiler was childsplay compared to changing the light in the clock.
Old Aug 5, 2005 | 10:55 PM
  #12  
Epacy's Avatar
Unsuccesful STL Coordinator
iTrader: (6)
 
Joined: Jun 2004
Posts: 2,860
I had to re-wire mine and it shuts off when the doors are closed. This really has no bearing on this post.
Old Aug 5, 2005 | 11:25 PM
  #13  
hockeyboy82's Avatar
Member
iTrader: (1)
 
Joined: Jan 2003
Posts: 104
From: Ny
i'm positive it turns off after the car starts. I put in a blue bulb probably a little over a year ago and its starting to fade actually. it looks whitish now. when i bought the bulb it came with 2. i just havent had time to put in the other bulb yet. the LED looks cool but looks like a lot of work. but if you have the time and the tools it looks pretty damn cool.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
ballerchris510
3rd Generation Maxima (1989-1994)
9
Sep 10, 2015 09:35 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM




All times are GMT -7. The time now is 05:15 AM.