Talyan03

hello a have a question for those that have aftermarket brake pads. i just purchused cross drilled rotors and i was wondering what kind of pads work the best, without making a noize. thanks!!!!!!!!!!!!!!!!!!!

mtrai760

iTrader: (19)

Read down the post and use google or donate. this question has been asked and answered several times this week alone...

Lontar1

iTrader: (5)

same questions all the time and the same asnwers.... Donate and do a search....... for now

Get Hawk pads..... save you time and flame..now delete the thread....good luck

bebandit

Had to get rear pads. Rotors had been turned once already (previous owner) so I just got some OEM replacement rotors ($30) + Hawk HPS pads. Definite improvement on stock rotors so you should get even more of an improvement. Did a lot of reading and Hawk HPS had good reviews from folks with cross-drilled/slotted rotors. Rear pads only do approx. 35% (give or take) of a Max's stopping, so if you are doing fronts, Hawk HPS will be nice investment (expensive over other non-performance pads). They aren't to hard on rotors compared to their stopping power. I experience zero "noise" from them....

9378max

iTrader: (1)

oem pads

Talyan03

thanks guys

Talyan03

hello thanks for your reply. and the problem is that im curently using hps pads with my stock rotors for front and it seems to me that with oem pads the pedal is fermer and they make allot of noise. would stock pads work good with cross drilled rotors? or they are not desighned for them? thanks!

9378max

iTrader: (1)

When you are changing the pads, apply disc quiet grease, which you can buy at autozone, etc... this will solve the noise problem.

Talyan03

cool will have 2 try it