5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

throttle cable slack

Thread Tools
 
Search this Thread
 
Old Feb 24, 2006 | 09:01 AM
  #1  
JaKillz2's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 368
throttle cable slack

just a quick question, noticed my throttle cables had a fair amount of slack to them (car is off) wondering if that is right or not, I havn't touched them or anything either.
Old Feb 24, 2006 | 10:27 AM
  #2  
sloppymax's Avatar
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
Joined: Jul 2001
Posts: 4,695
From: Charlotte, NC
there is only one throttle cable, the other is cruise control. i tightened the slack out of mine shortly after i got the car. just use a 14mm open ended wrench but i would not suggest adjusting the cruise control stuff. some people have warned that tightening too much can make it snap but i have had no issues as of 75k miles.
Old Feb 24, 2006 | 10:33 AM
  #3  
JaKillz2's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 368
what would tightening do for the drive? and when you adjust the slack, between the nuts and where it wraps over the pulley thing, wouldnt that make the pedal more loose because youd be putting more cable towards that direction? Sorry its hard to explain.
Old Feb 24, 2006 | 11:45 AM
  #4  
sloppymax's Avatar
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
Joined: Jul 2001
Posts: 4,695
From: Charlotte, NC
you want to loosen one side of the nut and unspin the other and pull it toward the direction of the battery. it felt as though it made the reaction for the acceleration quicker.
Old Feb 24, 2006 | 12:04 PM
  #5  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
dont tighten it to much or it will raise your idle
Old Feb 24, 2006 | 12:51 PM
  #6  
JaKillz2's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 368
i get HOW you do it but i just dont get like.. when you make it tought on the throttle body end, then there will be excess cable on the opposite side of the nuts, leading to the pedal? wouldn't that mean there would still be slack?

PEDAL-------------N|N---\_/---Pulley Before

PEDAL-----\_/--------N|N------Pulley After

see what I mean?
Old Feb 24, 2006 | 01:18 PM
  #7  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
the excess goes away from the bolt to the end. not towards the pedal
Old Feb 24, 2006 | 01:25 PM
  #8  
Gapp's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2005
Posts: 396
***Don't jack with it***
Old Feb 24, 2006 | 01:32 PM
  #9  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by Gapp
***Don't jack with it***
the newbie has spoken


do you know where your throttle cable is?
Old Feb 24, 2006 | 01:41 PM
  #10  
Gapp's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2005
Posts: 396
Originally Posted by soonerfan
the newbie has spoken


do you know where your throttle cable is?
Yeah, my wife hasn't played with it in a while though.
Old Feb 24, 2006 | 01:49 PM
  #11  
SoonerFan's Avatar
Cletus
iTrader: (5)
 
Joined: Sep 2003
Posts: 23,676
From: OKC, OK
Originally Posted by Gapp
Yeah, my wife hasn't played with it in a while though.
very nicely put.
you have been placed on my "cool newbies not to mess with" list
Old Feb 24, 2006 | 01:58 PM
  #12  
sloppymax's Avatar
IMBOUTTOBUSTSOMEGHOSTS
iTrader: (8)
 
Joined: Jul 2001
Posts: 4,695
From: Charlotte, NC
mine is tightened down all the way and has not affected my idle. however i have adjusted one on a pathfinder and the idle was irratic, i assume because it affected the position of the butterfly in the TB.
Old Feb 24, 2006 | 02:06 PM
  #13  
Gapp's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2005
Posts: 396
I actually did tighten it up a little to see if I could squeeze a little extra response out of it, but it raised the idle out of my comfort zone. Me likes to be within the comfort zone. (Okay, shut up) I'm sorry. (your an idiot) Dammit, I did it again...
Old Feb 24, 2006 | 08:24 PM
  #14  
Lontar1's Avatar
Puerto Rico-Maxima Lover
iTrader: (5)
 
Joined: Apr 2004
Posts: 4,772
From: Florida
Originally Posted by Gapp
Yeah, my wife hasn't played with it in a while though.
Ouchhhh a great response .. you got
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gigabyte
8th Generation Maxima (2016-)
8
Jan 6, 2017 06:05 PM
knight_yyz
5th Generation Classifieds (2000-2003)
3
Oct 24, 2015 08:05 AM
sliptap
7th Generation Maxima (2009-2015)
2
Sep 30, 2015 05:57 AM
pktaske
6th Generation Maxima (2004-2008)
0
Sep 4, 2015 08:40 AM




All times are GMT -7. The time now is 04:48 AM.