BEst Coilovers for the max BOSS CHENS
#42
I'll work on getting some test samples to cars out on the East Coast so other members can take a ride-along.
Here is a popular coilover made by Bilstein (very reputable manufacturer) for Posches and BMWs (PSS9 coilovers) - no camber plates
For ultimate performance, you can't the JIC A2 because of the monotube shocks, since it is the best design. HOWEVER, its only worth it if you want to pay $1600 and have a car that is used on the track without worrying about reliability of the shocks and coilover noises (reported by local members with the A2's).
Since most maximas are mostly street vehicles, this is in my opinion the best compromise. Steel for durability, OEM upper strut mounts for silence, a completely noise free operation, and superior oil dampeners for a comfortable ride.
Here is a popular coilover made by Bilstein (very reputable manufacturer) for Posches and BMWs (PSS9 coilovers) - no camber plates
For ultimate performance, you can't the JIC A2 because of the monotube shocks, since it is the best design. HOWEVER, its only worth it if you want to pay $1600 and have a car that is used on the track without worrying about reliability of the shocks and coilover noises (reported by local members with the A2's).
Since most maximas are mostly street vehicles, this is in my opinion the best compromise. Steel for durability, OEM upper strut mounts for silence, a completely noise free operation, and superior oil dampeners for a comfortable ride.
#44
Welded steel brackets on a HKS coilover system
http://www.autopamplona.com/ficheiros/hks-susp.jpg
Skyline coilovers by HKS - no camber plates
Good coilovers - emphasis on shocks and dampening
http://www.autopamplona.com/ficheiros/hks-susp.jpg
Skyline coilovers by HKS - no camber plates
Good coilovers - emphasis on shocks and dampening
#45
Originally Posted by irish44j
always wondered, why do people post that they're "subscribing?"
you can also do it without replying....its in the upper right hand corner called THREAD TOOLS
#51
Originally Posted by DrKlop
Are there any disadvantages in oil filled shocks. I mean, if oil filled shocks are better than gas filled shocks, why do other coilover and shock manufacturers use gas?
http://www.jic-magic.com/productsjic_susp_flta2.htm
"high pressure nitrogen gas filled monotube design with special stable viscosity index oil that will not be affected by wide temperature changes"
indecentmax: pricing is not fixed yet due to the failing value of the American dollar. As of now they are $925-$950 shipped.
#52
Larry....yes, another question that I forgot in my pm...
since the fronts re-use the OEM upper strut mounts, would it be safe to assume that I could instead use my Stillen camber plates (which currently are in the car, replacing the same upper strut mount...?
oh, and a free bump
since the fronts re-use the OEM upper strut mounts, would it be safe to assume that I could instead use my Stillen camber plates (which currently are in the car, replacing the same upper strut mount...?
oh, and a free bump
#53
Yep, stillen camber plates should work.
The top hat on the BC coilovers is machined to hold the OEM strut bearing. In theory your stillen camber plates goes right on top since it utilizes the OEM strut bearing also.
The top hat on the BC coilovers is machined to hold the OEM strut bearing. In theory your stillen camber plates goes right on top since it utilizes the OEM strut bearing also.
#54
Originally Posted by Larrio
Here is a popular coilover made by Bilstein (very reputable manufacturer) for Posches and BMWs (PSS9 coilovers) - no camber plates
Originally Posted by Larrio
Skyline coilovers by HKS - no camber plates
#55
Originally Posted by DrKlop
Are there any disadvantages in oil filled shocks. I mean, if oil filled shocks are better than gas filled shocks, why do other coilover and shock manufacturers use gas?
It's a good technology, but it's not always better than the alternative. The trick is that the pressurized gas provides upward force, which means that the damper will be contributing to holding the car up as well as damping the motion of the suspension. That can be great because if it's done right, it can let you have good control of body motion without the use of super stiff springs. On the other hand, it also tosses a big extra variable into the suspension tuning equation, and sometimes it's just easier to have the damper and the spring do their jobs without getting in each other's way.
Ultimately it all depends on the construction of the damper, the setup of the suspension, the purpose, and the driver's preferences.
#56
Originally Posted by d00df00d
"Gas-filled" dampers are still oil-filled, and still use oil to damp the motion of the suspension. They just use the gas to keep the oil under pressure.
It's a good technology, but it's not always better than the alternative. The trick is that the pressurized gas provides upward force, which means that the damper will be contributing to holding the car up as well as damping the motion of the suspension. That can be great because if it's done right, it can let you have good control of body motion without the use of super stiff springs. On the other hand, it also tosses a big extra variable into the suspension tuning equation, and sometimes it's just easier to have the damper and the spring do their jobs without getting in each other's way.
Ultimately it all depends on the construction of the damper, the setup of the suspension, the purpose, and the driver's preferences.
It's a good technology, but it's not always better than the alternative. The trick is that the pressurized gas provides upward force, which means that the damper will be contributing to holding the car up as well as damping the motion of the suspension. That can be great because if it's done right, it can let you have good control of body motion without the use of super stiff springs. On the other hand, it also tosses a big extra variable into the suspension tuning equation, and sometimes it's just easier to have the damper and the spring do their jobs without getting in each other's way.
Ultimately it all depends on the construction of the damper, the setup of the suspension, the purpose, and the driver's preferences.
Larry, you got a PM. (hopefully you can see this lol)
#58
I might be interested to buy a set for my 2k1, but I'm in no rush and will hopefully sell the D2 at the end of the summer when it's time to put the max back in the garage for the winter. Keep us posted as to when the Boss Chens will be available and at what final price.
Cheers
Cheers
#59
Originally Posted by Larrio
Welded steel brackets on a HKS coilover system
http://www.autopamplona.com/ficheiros/hks-susp.jpg
Skyline coilovers by HKS - no camber plates
Good coilovers - emphasis on shocks and dampening
http://www.autopamplona.com/ficheiros/hks-susp.jpg
Skyline coilovers by HKS - no camber plates
Good coilovers - emphasis on shocks and dampening
Anyways- those HKS HyperMax coilovers.... on Multi-link design suspensions like the ones found in the BCNR32-34 GT-R, Z32 300ZX, G50 Q45, P10 G20- do not use camber plates to adjust camber with. You need a upper control arm that adjusts for camber, or you can shim the stock OEM control arm for up to 1 deg of negative camber reduction.
Here is a SPL link installed that does camber adjustment on a Z32. I have the same setup on my Q45.
Only McPherson strut designed cars can use upper camber plates to controll the amount of camber.
#60
I think some may be confused by this thread and I should set things straight.
My goal is not to create the best coilover system in the world for the maxima nor blow out the competition by massively producing these. (I could have easily done this just by having a set produced overseas). I needed a coilover system that would:
1. be noise free and reliable
2. be comfortable
3. handle the occasional tracking expedetion
The steel construction provides reliability, the OEM strut bearing and hat provides a cheaper replacement cost and noise free operation. The rather low spring rate of 8kg f/6kg r combined with the struts makes a comfortable ride. And the adjustability of the coilovers handles my track runs.
This is not a product that I stock and I definitely don't plan to market it in terms of ads. I build these per order on my own time during weekends. It is a quality component and I have no interest making an alternative to compete with other brands of coilovers that are cheaper. With this in mind, I believe that the people that do run the BC coilovers will be satisfied with the individual attention and quality given to each set.
My goal is not to create the best coilover system in the world for the maxima nor blow out the competition by massively producing these. (I could have easily done this just by having a set produced overseas). I needed a coilover system that would:
1. be noise free and reliable
2. be comfortable
3. handle the occasional tracking expedetion
The steel construction provides reliability, the OEM strut bearing and hat provides a cheaper replacement cost and noise free operation. The rather low spring rate of 8kg f/6kg r combined with the struts makes a comfortable ride. And the adjustability of the coilovers handles my track runs.
This is not a product that I stock and I definitely don't plan to market it in terms of ads. I build these per order on my own time during weekends. It is a quality component and I have no interest making an alternative to compete with other brands of coilovers that are cheaper. With this in mind, I believe that the people that do run the BC coilovers will be satisfied with the individual attention and quality given to each set.
#61
Originally Posted by Larrio Motors
I think some may be confused by this thread and I should set things straight.
My goal is not to create the best coilover system in the world for the maxima nor blow out the competition by massively producing these. (I could have easily done this just by having a set produced overseas). I needed a coilover system that would:
1. be noise free and reliable
2. be comfortable
3. handle the occasional tracking expedetion
The steel construction provides reliability, the OEM strut bearing and hat provides a cheaper replacement cost and noise free operation. The rather low spring rate of 8kg f/6kg r combined with the struts makes a comfortable ride. And the adjustability of the coilovers handles my track runs.
This is not a product that I stock and I definitely don't plan to market it in terms of ads. I build these per order on my own time during weekends. It is a quality component and I have no interest making an alternative to compete with other brands of coilovers that are cheaper. With this in mind, I believe that the people that do run the BC coilovers will be satisfied with the individual attention and quality given to each set.
My goal is not to create the best coilover system in the world for the maxima nor blow out the competition by massively producing these. (I could have easily done this just by having a set produced overseas). I needed a coilover system that would:
1. be noise free and reliable
2. be comfortable
3. handle the occasional tracking expedetion
The steel construction provides reliability, the OEM strut bearing and hat provides a cheaper replacement cost and noise free operation. The rather low spring rate of 8kg f/6kg r combined with the struts makes a comfortable ride. And the adjustability of the coilovers handles my track runs.
This is not a product that I stock and I definitely don't plan to market it in terms of ads. I build these per order on my own time during weekends. It is a quality component and I have no interest making an alternative to compete with other brands of coilovers that are cheaper. With this in mind, I believe that the people that do run the BC coilovers will be satisfied with the individual attention and quality given to each set.
#62
I can't speak for these particular coilovers, but I have had Ksports for nearly a year and about 25k miles and I've definitely had a few little stripes of surface rust in the threads (Ksports also have steel shock bodies), so my experience might be valuable. You're right, rust does make them hard to adjust. Fortunately, the solution is about as simple as some rust-eating spray, a wire brush, and maybe some brake cleaner if there's also some gunk in there. 30 seconds with that stuff made my adjustment collars turn virtually like new.
#64
Originally Posted by sciff5
How should the steel handle the street salt found in New England? Even some surface rust on the threads will make it nearly impossible to adjust.
DrKlop: Yes, it has independent height adjustment.
#65
Originally Posted by Larrio Motors
I didn't say that steel handles surface rust better. I said that steel was used for reliability. Aluminum is a weaker metal compared to steel.
DrKlop: Yes, it has independent height adjustment.
DrKlop: Yes, it has independent height adjustment.
#66
Originally Posted by Larrio Motors
I didn't say that steel handles surface rust better. I said that steel was used for reliability. Aluminum is a weaker metal compared to steel.
#68
They are linear, yes.
If you run a tender spring, you can make it progressive (depending on the spring rate of the tender spring). The helper spring is merely to take up the loose slack if you want no preload.
If you run a tender spring, you can make it progressive (depending on the spring rate of the tender spring). The helper spring is merely to take up the loose slack if you want no preload.
#69
Originally Posted by Larrio Motors
They are linear, yes.
If you run a tender spring, you can make it progressive (depending on the spring rate of the tender spring). The helper spring is merely to take up the loose slack if you want no preload.
If you run a tender spring, you can make it progressive (depending on the spring rate of the tender spring). The helper spring is merely to take up the loose slack if you want no preload.
#70
Its progressive in a good sense. The tender spring will provide a progressive spring rate as a cushion when the suspension unloads but goes back to linear when it compresses fully and starts back into the normal linear spring travel area.
#71
Originally Posted by Larrio
Its progressive in a good sense. The tender spring will provide a progressive spring rate as a cushion when the suspension unloads but goes back to linear when it compresses fully and starts back into the normal linear spring travel area.
#78
I believe all PM's are answered. I didn't import too many sets in my first shipment so i'm having a bit of a shortage right now. Sorry for the inconvenience. I'll be getting more as the summer months roll in
#80
Originally Posted by FriscoMaxima
why not just buy Tein SS coilovers?