SES light went on????
SES light went on????
I have been srinving around with my SES light for about 1 week now... Does the light go away after a certain amount time or mileage driven? I would really appreciate if anybody can help me out with this....
Thanks - Rami
Thanks - Rami
Most likely not. I for one would rather try to find out what is causing the light to be triggered than simply just try to hope that it goes away. There's obvioulsy something going on with your car that needs to be addressed.
my guess... p0430!! had that for a while, it's been going on and off. from intake of course.. so i say screw...
not that i'm saying yours is p430 as well. get a scanner and read it.. might be something bad that you should replace now before it gets worse in the long run.
not that i'm saying yours is p430 as well. get a scanner and read it.. might be something bad that you should replace now before it gets worse in the long run.
Either clear the codes yourself or have the people at Autozone (or any other auto parts place with an OBD scanner) clear them and see if they come back. Obviously, also make sure you note what codes they are.
Thanks a lot guys.... I didnt know that autozone reads codes for free. I will def take the car in this friday and see what there scanner says. I will keep everyone posted. If anybody has anything they would like to share , the more the welcome. Thanks
P1320 ????
Hey Maxima Doctor's
I need help - A week ago my SES light went on. I went to autozone to get a reading and they scanned it with a P1320 - Manufacture Controlled ignition system or misfire. Should I be worried? Is this a big problem? I never had a problem with the maxima - the time the light went on was when I turned the car on and for some reason the car felt like it was going to shut off, but 3 sec.. later it was fine. So i was thinking just like the code said - misfire - ... anybody can help and give me some more information?
Thanks
Rami
I need help - A week ago my SES light went on. I went to autozone to get a reading and they scanned it with a P1320 - Manufacture Controlled ignition system or misfire. Should I be worried? Is this a big problem? I never had a problem with the maxima - the time the light went on was when I turned the car on and for some reason the car felt like it was going to shut off, but 3 sec.. later it was fine. So i was thinking just like the code said - misfire - ... anybody can help and give me some more information?
Thanks
Rami
Originally Posted by Coby099
Thanks for the link - But I wana know if the SES lights off eventually even if you dont check the code.......??
It's pretty irrevelent, but FYI. All obdII cars check engine light will eventually shut off after IIRC around 40 "cycles" without reoccurance. IIRC the ecu considers a "cycle" a change of temp from around 130 to 170 or somewhere around there.
Originally Posted by Coby099
I was wondering if Bigfatty can assist me with the P1320 - and letting me know in more detail what it is and if I should worry about it or not. I put no more then 3 K miles on it a year.....
Thread
Thread Starter
Forum
Replies
Last Post
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
Sep 8, 2015 12:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM





