Project: New-style Front Lip - Done!
#44
Originally Posted by Jay_Alix
I'd be curious to know if it has any effect, negative or positive, on engine cooling at highway speeds.
#45
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by Jay_Alix
I'd be curious to know if it has any effect, negative or positive, on engine cooling at highway speeds.
That said, the Maxima actually has a very good cooling system and I don't really consider it an issue.
#47
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by upstatemax
Looks good, but I like the one I built myself better.
I built it from scratch... Took about 40min.
I built it from scratch... Took about 40min.
#48
Originally Posted by upstatemax
Looks good, but I like the one I built myself better.
I built it from scratch... Took about 40min.
I built it from scratch... Took about 40min.
You should see my interior, it took me a single afternoon and an 18-pack to do.
#49
Supporting Maxima.org Member
iTrader: (15)
Join Date: Nov 2004
Location: Clifton Park, NY
Posts: 4,035
Originally Posted by irish44j
I know the feeling. I built my entire car from scratch in about 3 hours. I just put Nissan badges on it for fun.
It came out pretty good, but you put the wrong rims on it.. Those go on a G35....
Damn noobs...
PS- can I have your rims?
#50
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by upstatemax
It came out pretty good, but you put the wrong rims on it.. Those go on a G35....
Damn noobs...
:
Damn noobs...
:
#51
Supporting Maxima.org Member
iTrader: (15)
Join Date: Nov 2004
Location: Clifton Park, NY
Posts: 4,035
Originally Posted by irish44j
Hell no....I forged those rims myself - then Infiniti copied them
Good, then you can make me a set... That explains why you have three sets of rims, you just make them yourself!
#55
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by zero2sixtyZ
Nicely done irish. I had a SE-R and these were pretty popular with the Vboard crowd. Credit for matching it up to a maxima. Will this fit the same with an 02-03 bumper?
#59
like yayomax said, it looks like a thinner version of the lip that came on the second gens (check the sig pic on bottom right)or this pic, great idea and it looks nice on the newer max (with less air resistance as well, mine acts like a small air brake (see: dive-bomber air brake, almost as big)
#61
Originally Posted by irish44j
Already did this about 2 years ago lol.
I went ghetto and tried to paint it and fiberglass it. It does look better with a square flat bottom like my friends sentra:
Nice work though, I would have never thought of incorporating another car's lip onto ours. I think luda in the 4th gens used some other home depot stuff.
#65
Supporting Maxima.org Member
iTrader: (3)
Join Date: Nov 2004
Location: Baton Rouge, LA
Posts: 5,432
I'm not 100% sure if i like it or not..i mean, from the front and up close it looks really good, but from the side, since the 5th gen bumpers are shaped like that, it looks too tucked in...Excellent idea, and it looks much more subtle than any of the lips available for the max, so
#67
http://www.g20.net/forum/showthread....highlight=mach
I saw that a few weeks ago, I thought it looked pretty good on the P11. Its ok on the 5th gen due to the corners not lining up, other than that its a nice low key addition.
Irish, still running the Taurus splitter thing? I think it can see it in one of the pix. If so, you probably dont need it anymore.
I saw that a few weeks ago, I thought it looked pretty good on the P11. Its ok on the 5th gen due to the corners not lining up, other than that its a nice low key addition.
Irish, still running the Taurus splitter thing? I think it can see it in one of the pix. If so, you probably dont need it anymore.
#68
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by NYPD-Arnold
Haha, this reminds me of the ghetto lip that 4th gens made out of rubber molding. I don't know, I'm not feeling it too much, it looks like the rubber scrappers that most cars have underneath them more than anything else.
#69
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by JSutter
http://www.g20.net/forum/showthread....highlight=mach
I saw that a few weeks ago, I thought it looked pretty good on the P11. Its ok on the 5th gen due to the corners not lining up, other than that its a nice low key addition.
Irish, still running the Taurus splitter thing? I think it can see it in one of the pix. If so, you probably dont need it anymore.
I saw that a few weeks ago, I thought it looked pretty good on the P11. Its ok on the 5th gen due to the corners not lining up, other than that its a nice low key addition.
Irish, still running the Taurus splitter thing? I think it can see it in one of the pix. If so, you probably dont need it anymore.
good link, btw. I guess I'm not as creative as I thought
#72
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by kcowden
That looks great, you wouldn't happen to have a P/N for that lip or any other specific info? Thanks!
and you'll see it about 10 items down the page.
#75
Originally Posted by irish44j
I'm not sure if it's the official ford part number or not, but scroll down the screen at http://www.gefracing.com/Merchant2/m...ory_Code=MACH1
and you'll see it about 10 items down the page.
and you'll see it about 10 items down the page.
#78
http://www.classicdesignconcepts.com...splay/576.html
Thats the cheapest ive found so far online
Sorry about that earlier this morning irish and thanks to who deleted the posts.
Thats the cheapest ive found so far online
Sorry about that earlier this morning irish and thanks to who deleted the posts.
#79
retired moderator
Thread Starter
iTrader: (38)
Join Date: Oct 2003
Location: Burke, VA
Posts: 27,289
Originally Posted by chopstix2nrz
http://www.classicdesignconcepts.com...splay/576.html
Thats the cheapest ive found so far online
Sorry about that earlier this morning irish and thanks to who deleted the posts.
Thats the cheapest ive found so far online
Sorry about that earlier this morning irish and thanks to who deleted the posts.
Tim cleaned up the thread. Thanks Tim.