hello everyone I just bought a pair of 02 headlights on ebay and im working on them right now clearing out the blinker ae mod and angel eyes and eye lids. I finished one side and I searched on boardtracker and I found some writeups. I figured out the high beam and low beam I just cant figure out the park light and the blinker.

Also on a stock 02 maxima when you turn on the low beams does the blinker light up and the park light?

Or is it low beam and park light and then the blinker turns on when you turn it on?

Which one is it?

I would like to wire it up when the low beam is on only the park light is on and the only time the blinker is on is when you turn it on.

 

i think that's how they work. when i turn on my lights only the low beam turns on. i took out my parking light cuz i don't like them but those stay on with low beam. the turn signals don't come on unless i turn them on. sorry not sure what you're asking i bought a set from ebay too and i just plugged mine in and they worked.

edit: nevermind...sorry didn't see you had a 00 maxima

 

When wiring the HID's in the 2k-2k1's you have to wire it as if the car is a 2k2-2k3. So, in saying this, when the low beams are on, the parking light is on with the low beams. The blinker is only used for turn signal purposes only. This means it only turns on when the turn signal switch is being used. When the high beams are on, the HID's (low beams) should stay on also. As for the blinker, you can cut it owns ground wire and wire it to the chassis of the car so that it doesn't share it's ground off the headlight harness. That is how I have mine wired. This is so the blinker doesn't flash with the HID's.

 

what do I wire the two blinker wires to?

 

First, do you have the headlight harness kit? If not, you definitely need this. But, as for the blinker, take the positive wire from the turn signal (red/yellow) and wire it to the (green/white) of the headlight. I'll help you more if you PM me. This is a touchy subject in listing these instructions in public view because of the high rate of theft of these headlights.

 

ok check your pm

 

i just bought a set of 2k2 hids for my 01 now i need help wiring them up can anyone help me out. e-mail me at showstoper@yahoo.com

 

I will send it to you on Xmas

 

thanks alot it would really be one of the best x-mas gifts that i plan on getting this x-mas. again thanks and it would mean alot to me if you help me.

 

Merry Xmas. Email sent. Let me know if you were able to open the file

 

I have the email but, i do not have a file or any kind of link that has the info. so i do not see anything that is showing me how to wire the hids.

again i thanks for your help. its like you giving me $600 dollors for X-mas

 

try it again

 

Kilical01 you have the wrong email address in you post. Check it out you are missing the "01". I sent it ot showstoper01@yahoo.com this time

 

^^ i have a set of 2k2's also from ebay but have not got around to doing the mod because i hate weather under 68 degrees

hey lhercules u think you could email me the help as well............I SENT YOU A PM WITH MY EMAL ALSO

thanks

 

sorry, and thanks for you help.

 

No problem dude

 

i really hate cutting my wires. i hear that i could use a wire harness that would make this job plug and play, can you tell me how true this is.

 

You can do a neat job and just shave the rubber wire sleeve. so that just the wires are exposed and make your connection there

 

NEVA HEARD OF THAT B4

 

No matter what you do, you have to end up cutting the wires in order to make the connections work (unless you have the male/female plug harness to connect the plugs--which I highly doubt). Do what I did....I used male/female qick disconnects on the wires so that I can make the transition of going back to the halogens much easier and quicker if I decided to. Takes me less than a half hour to do the whole swap (I did it before once).