silvermax2k2

iTrader: (1)

all this talk about clearing out headlights is making me get brave! I just bought some angel eyes off ebay, but now I need to know how to get my headlights out of the car. I understand the sensitivity of this information, so please do not respond to this page - please PM me.

obviously I am trust worthy, I joined in 2002, spent a ton on my car, and I am an active user. I don't want to hear any can I trust you crap. thanks

SoonerFan

iTrader: (5)

data dots and theft prevention kits are two diffirent things.

data dots dont dont change the way you remove the lights...the prevention kit does.

MIXXMAX

iTrader: (1)

Open up the hood. It should be self explanatory from there to see how the headlights are mounted to the car. Loosen, remove, disconnect, and pull out.

silvermax2k2

iTrader: (1)

is it that easy? I have always seen people asking how to take them out, so I just assumed it was hard. well as long as you guys say its easy, i guess it shouldn't be too bad then.

sickmax

iTrader: (17)

opppss delete

MyBlue02

pm me...there are a few things that mount the headlights to the car with the full data dots install

MaxTooNice

iTrader: (5)

Bringing this thread back from the dead. Can somebody pm me with some info? This was a lot easier when I had my 2000. I tried to remove the headlights on my 02 but I couldn't get them off. I think they have the additional bracket.

MaxTooNice

iTrader: (5)

anybody?

MaxTooNice

iTrader: (5)

alright, I guess the whole bumper will come off this weekend. If anybody knows an easier way please pm me!

jeff5347

gotta bump this thread. planning on doing the clear blinker light and dde's but i have data dots. Can someone pm me on how to remove the lights with the dots on. thanks

jeff5347

bumping this... come on someone has to know that can pm me...

Stereodude

I don't know anything about data dots (wasn't done on mine), but my headlights just come right out. You take out the two screws and lift the headlights up and out. There is a metal pawl on the outside edge that may hold them in. A little prying forward on the outside edge and the metal pawl will pop out out of the plastic guide.

Is there something drastically different about lights with the data dots?

jeff5347

im not really sure. i have the dots but dont know if its for the id or if it has the security brackets also. I took the top 2 10mm screw out and can get it about an inch out.. then it feels like something is hanging it up. This is a stupid question and yes i did undo them but if you dont have the wires for the lights undone that will hold the light from coming out all the way. Meaning there is no give on the wires? ALso is there a bolt underneath that needs to be undone as well. . ive tried but didnt want to break anything or scratch anything i am hesitant on yanking on it til i know ive undone all the bolts. Any help is appreciated.

djfrestyl

iTrader: (89)

Yes, a completely different bracket.

No one will outwardly explain how to remove them in a public forum. This is a sensitive topic because of the rampant and expensive headlight thefts that were occurring a while back. Those in the northeast that were experiencing the problem did not need a how-to for would-be thieves all over the internet. Please do not ask. It is possible, but is more involved than just 2 bolts.

jeff5347

im just going off of Irishs thread. no one has to post it in the thread they can justr pm me. If someone is gonna steal them im sure they wont take time to read this and time to genlty take them off. All i ask if someone has some useful info on taking the assemblies out pm and i will be grateful


http://forums.maxima.org/5th-generat...-how-here.html by irish44j

Orgullo

iTrader: (47)

PM sent...


/thread

jeff5347

thanks orgullo and phatmax. i got the lights out. I didnt need to take the bumper off. Once i found the bracket it was fairly simple.

marvinzon

sorry to bring this forum back from the dead, but does someone mind pm-ing me also on how to remove the headlights with the data dot brackets...if you really don't trust me, i can give proof and send some pictures. thanks!

Clashez

iTrader: (5)

how would you even now if you have that extra bracket.
i want to black out my head lights before its starts getting cold out

Clashez

iTrader: (5)

bump on how to

marvinzon

For anybody that hasn't figured or discovered it yet, cruise through this thread:

http://forums.maxima.org/5th-generat...ml#post7242301

DjHackStyle

any help with removing them would be helpful to me please, djhackstyle@hotmail.com