i see it on ebay for dirt cheap...but i know nithing about it...looks like the ACTIVE one...but alot cheaper in price.

thanks

 

looks like the same but you need both pieces.... when i searched ebay only 3 popped up and none of them were the complete STS kit.

 

you dont need both peices, the peice on the actual shifter is only for shifter position, you can live without it

 

I bought my Fidanza short shifter off ebay, but before you buy anything make sure to match the part number off the manufacturers web page to the one on EBAY. To install it you will need a lift or a Floor Jack and Stands, cuz its not something you can do from the inside of the car like a Mustang. You will also have to modify the exhaust heat shield so allow a hour or two to install it especially if you have never done one before.

 

http://cgi.ebay.com/ebaymotors/Nissa...spagenameZWDVW

its a 2 piece unit acourding to them (i e-mailed them)

only thing i can guess is missing the ploy bushing for hte shifter?

 

but it doesnt improve the shift motion because of the location of the ****. i have the two piece and tried it out with just the piece under the hood and it made the shifts worse. i kept hitting my hand on the ashtray

 

that looks exactly like the watkins one I have...price is even the same

 

will this work on a 00

 

no..........

 

where did you get it from at that price? catman?

looked all over on catman and didn't see it (i know you said they have them on a diff thread about short throws)

i'd rather support a sponser here...

 

"moving on up"...to the top?

 

i got in (with ES bushing) as part of a group deal. i dont know if they still have them. you may need to call brian at cattman.

 

I Just installed the Axxtion STS on my 02 SE and its sweet. It was a breeze to install and it works well. The shifts are noticebly shorter and with the two piece that i got (found it on ebay, but took longer to find two piece than just the one) the shift **** is not even close to hitting the dash. in fact it seems to me like its a little further back than stock, which i kinda like, but certainly no conflict with anything as far as space. i think its worth the like 85 bucks or whatever cause it is a good quality product.

 

Revs2Hard, how do you like your Fidanza??? I've been checking it out for a while, but couldn't find anyone that had tried it.

 

You have a 2000, you have a totally different set-up.

 

thats for a 5-speed.
the 6-speed is easier, you can do everything from inside the car and under the hood.

 

just as a FWI on the watkins sooner said he got for around the same price through a catman group deal...

i talked to brian and he said there is no way that happened as whole sale price for the watkins is over $100.

(note: this is for people using hte search feature so that they don't think they can get a watkins for under a $100 in a group deal.)

 

I have one. I have been using it for 6 moths or so. I Like IT!!
for the price it gets the job done.

 

Did somebody try this short shifter??
http://cgi.ebay.ca/SHORT-SHIFTER-FOR...QQcmdZViewItem

 

why would you buy something with so many pieces when you can get one with only two?

 

I wonder how that works with the reverse lockout.

 

This is not only short throw shifter; this is a short shifter with short throw also. At a lower price of the expensive small peace of aluminium use on the short throws system.

 

going from 5th to reverse would suck

 

Yes....I wouldn't be a happy camper....

 

I have a B&M shifter in my 2000, and it shifts great.

 

Why don't you just drill a hole, tap it and screw in the linkage closer to the pivot. I did mine for $0.48 and about 30min worth of work. It's at least 45% shorter shift now.

 

You just talk about short throw only, but it is short trow and short shifter.