doublea

iTrader: (7)

Hey guys, I'm kind of rebuilding my 2k1 max now, I'm in the process of removing the axle before the engine and tranny get removed, I've removed the ball joint, coilover, brake everything is removed now I just need to know how to pull the axles out ?

Any help would be greatly appreciated.

AA

nismology

iTrader: (8)

This forum is getting mucked up...

SPiG

iTrader: (7)

Step 1: Move this to a general forum.
Step 2: For Driver you just push in and pull out fast and hard. Passenger you have to unbolt the axle mount thing on the engine, and then it is the same as the driver.

JClaw

iTrader: (17)

Use a pry bar. Works great. Longer the better.

xlcrew

iTrader: (17)

mine just pulled out after i unbolted the bracket for the passenger side

95BLKMAX

iTrader: (10)

GTFO of the all motor forum with these questions! this is for general forum or 5th gen forum. Whats so "All Motor" high performance about removing axles! :ban:

A33 VQ30DEK

iTrader: (23)

use a pry bar. I wouldn't use force to yank it out if you were to pull it out, the joints could come out of the socket.

nsnrider

iTrader: (59)

+1 on pry bar, should come out with no problems, just make sure you get the three bolts on the passanger side.

doublea

iTrader: (7)

Listen If you dont want to help other GTFO of here.

doublea

iTrader: (7)

Thank you guys for the infos I knew I would get starit answers. The reason I posted here is because it seem to have more people who had to deal with that kind of stuff.

95BLKMAX with that kind of attitude you will go no where in your life, the first time I drove a maxima you where still wearing diapers.