Who's got it? Megan Racing OE-RS catback!!
#126
Originally Posted by 98_maxi
HERE YOU GO GUYS
only can hear it between 1000 - 2000 RPMs
only can hear it between 1000 - 2000 RPMs
#129
Originally Posted by nk2k2
huffdaddy, have you driven the car around 60-80 mph? if so, is it loud like ricer loud at those speeds? is it a lot louder than expected? enough to attract the 5-0s attention?
#132
Originally Posted by OOmaxSE
Huffdaddy, what mods do you currently have for your exhaust? Intake?
I'm running I/H/B and I rasp like a **** on stock rear. If it's gonna be loud, at least be meannnn
I'm running I/H/B and I rasp like a **** on stock rear. If it's gonna be loud, at least be meannnn
#134
no matter what catback i think it will be loud with headers....
I have a pritty quiet setup.
hotshot headers, random tech cat (just added) , maganflow resonator (one of the best out), and a obx muffler and my car still a bit loud over 2.5k.
If you want headers but want the car quiet, stick with the stock muffler.
I have a pritty quiet setup.
hotshot headers, random tech cat (just added) , maganflow resonator (one of the best out), and a obx muffler and my car still a bit loud over 2.5k.
If you want headers but want the car quiet, stick with the stock muffler.
#142
Senior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Lewis Center, OH
Posts: 1,806
Well, saturday, the entire rear section seperated from my flange. I removed the axle back section on Sunday, pulled off my nice round stainless angle tips and bought this... (Should be hear by end of week)
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
#143
Originally Posted by nismopc
Well, saturday, the entire rear section seperated from my flange. I removed the axle back section on Sunday, pulled off my nice round stainless angle tips and bought this... (Should be hear by end of week)
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
#147
Senior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Lewis Center, OH
Posts: 1,806
Originally Posted by meccanoble
someone said they got this for 265? How so?
#149
Originally Posted by nismopc
Megan pre-released a couple that were listed on eBay and a few guys got lucky before they officially released it on their website. No one bid on them so the starting bid was lower than retail and voila'
I was one of these people who got one.
I have had no problems so far.
Some pre install, and installed photo's here:
http://s197.photobucket.com/albums/aa120/WMASSMAX/
#150
Originally Posted by nismopc
Well, saturday, the entire rear section seperated from my flange. I removed the axle back section on Sunday, pulled off my nice round stainless angle tips and bought this... (Should be hear by end of week)
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
I will be removing the really cool square tips (???? WTF - square ????) and welding on my stainless tips for that OEM look. Byt the way, besides the droning in the car due to the fact the piping is facing straight up into the chassis, the car sounds really nice with no muffler. No kidding.
If the b-pipe decides to take a **** as well down the road, I just plan on making a custom b-pipe with resonator, but until then....
Are you talking about the new Megan exhaust that broke?
#154
Senior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Lewis Center, OH
Posts: 1,806
Originally Posted by sooner02r1
Oh dang, good. I thought he was talking about the Megan and I was having serious second thoughts about gettin gone. That post was pretty much irrelevant then and he should've specified.
In the meantime, my OEM axle back flange rusted and the rear section seperated completely from flange. I removed the rear section, and was quite impressed with the sound w/o muffler. So I decided to see what axle backs were available and decided to just keep the stock OEM mid-pipe and do a aftermarket axle-back.
So...
...to be continued. Hope to have end of week.
#158
Originally Posted by nk2k2
anymore updates?
I am debating whether or not to add this 28" thrush glasspack resonator to replace the one that came with it. I just dont know if it will actually quiet things down at all, or get rid of some of the pop and rasp. Anybody wanna chime in?
#159
Originally Posted by huffdaddy2008
Im getting some rattling when i go over BIG bumps, ill try some washers on the crossbars, other than that, nope. Im lovin it.
I am debating whether or not to add this 28" thrush glasspack resonator to replace the one that came with it. I just dont know if it will actually quiet things down at all, or get rid of some of the pop and rasp. Anybody wanna chime in?
I am debating whether or not to add this 28" thrush glasspack resonator to replace the one that came with it. I just dont know if it will actually quiet things down at all, or get rid of some of the pop and rasp. Anybody wanna chime in?
If your thinking of replacing a resonator, Go with a magnaflow. Thats what I have , only time its raspy is when i just start the car and the exhaust is cold. Other than that it sounds great.
I have a video of my exhaust but now I have the same setup just with a cat.